当前位置:温州辽飞防爆电气有限公司>>防爆灯系列>>防爆安全出口灯>> BYY防爆安全出口指示灯
BYY防爆安全出口指示灯产品特点 Features
铸铝合金外壳,表面喷塑。
透明标志牌可由用户自由选配
电子发光板式,采用*的压电
效应,在正常工作时几乎不耗电,
应急时间在2小时以上,且免维护,
降低了运行费用。
内装免维护镍镉电池组,在正常供
电下自动充电,事故或停电时应
急灯自动点亮。
钢管或电缆布线均可。
符合GB12476,IEC62141要求。
Diecasted aluminiumalloy shell with plastic-sprayed surface.
The transparent mark-plate can be chosen and matched to user’s requirement.
The electronic uminescence boardtype,uses special piezoelectricityeffect.
under the normal,it hardly consume the fime it can last several hours in
the emergency meanwhile,need no maintenaince and reduce the operation
cost use.
Under the normal power-supplying condi tionm the inner nickel-cadmium can
recharge automatically,so that,the emergency lamp will tum on automatically
when the power lose because of accident or power failure.
Suitable for both steelpipe and cable wiring.
Suitable for GB12476,IEC61241 standard request.
BYY防爆安全出口指示灯主要技术参数 Main technical parameters
产品型号
Type 额定电压(V)
Rated voltage 额定功率(W)
Pated power
光源
Luminous source 应急照明时间(min)
Emergency lighting tme 防爆标志
Ex-mark 进线口螺纹
(G")
Inlet’s thread
质量(Kg)
Mass 正常照明
Normal lighting 应急照明
Emergency lighting 正常
Normal 应急照明
Emergency 正常
Normal 应急照明
Emergency
CBYD-P 220V/50Hz 6 9 20 U型荧光灯管
UFluorescent lamp tube 碘钨灯
lodin-tung-stem lamp 90 Exd II BT6 3/4 8.6
CBYD-T ≤3 电子发光板
Electronic luminescence board
120 6.6
标志牌代号(可根据用户要求特制)Marks code (can be custommed to user’s requirement)
护栏式(h)Fence tpe 法兰式(f)Flamge type
壁式(b)Bracket type 吊杆式(g)Pendant type
弯杆式(w) Bend-rod type 吸顶式(x) Ceiling type
吊杆式(d)Chain type
外形及安装举例 Outline and example
壁式(b) Bracket 吸顶式(x)Ceiling
吊杆式(g) Pendant 电子发光板式(吊杆式)Electronic luminescence board(Pandant)
byy防爆安全出口指示灯LED光源特性
LED即半导体发光二极管,LED灯是采用高亮度白色发光二极管作为发光源,光效高、耗电少、寿命长、易控制、安全环保,是新一代固体冷光源,比节能灯省电,高亮度、投光远、投光性能好、使用电压宽、低损耗、低能耗、绿色环保。与白炽灯或荧光灯管相比,LED的稳定性和长寿命是明显优势;白炽灯连续工作时间一般小于1000小时,电子驱动器的荧光灯管连续工作时间一般为8000小时,LED能够工作5万小时以上。且在同样亮度下,LED的电能消耗仅为白炽灯的1/10。
请输入账号
请输入密码
请输验证码
以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责,化工仪器网对此不承担任何保证责任。
温馨提示:为规避购买风险,建议您在购买产品前务必确认供应商资质及产品质量。