派克PARKER电动执行器HPLA120 美国PARKER执行器现货供应

派克PARKER电动执行器HPLA120 美国PARKER执行器现货供应HPLA 120 BELT DRIVEN, ROLLER WHEEL, RODLESS LINEAR ACTUATOR HPLA120 actuators incorporate a high strength timing belt, guided by low friction, heavy-duty roller whe

派克PARKER电动执行器HPLA120 美国PARKER执行器现货供应HPLA 120 BELT DRIVEN, ROLLER WHEEL, RODLESS LINEAR ACTUATOR HPLA120 actuators incorporate a high strength timing belt, guided by low friction, heavy-duty roller wheels, inside a sealed housing. With load capacity to 6900N and speeds up to 5m/s, HPLA120's are optimized for high speed, single or multi-axis systems

The HPLA series of linear actuators is an extremely rugged and industrially hardened linear actuator that offers high speed, high acceleration, and long travel lengths, combined with a stiff, rigid construction. It is ideally suited for use in either single axis configurations or high speed, multi-axis gantry systems.  The HPLA carriage is rigidly supported on three sides by heavy duty, roller bearings housed inside of a rugged aluminum housing. The bearing wheels are pre-loaded to eliminate play in the system and strategically located along the carriage to evenly distribute load across the length of the carriage.                

The HPLA's high strength, steel reinforced belt and pulley system provides fast, highly repeatable positioning of the carriage. The HPLA utilizes over-sized pulleys which allow the it to provide very high levels of thrust output relative to the profile size. The mounting of the belt to the carriage is designed to enable easy replacement of the belt without the need to remove the payload, while simultaneously providing a very rigid connection. Having a low coefficient of friction, the carriage design provides a high mechanical efficiency and long service life. Special carriage lengths and linear units with multiple carriages are available for custom applications.  

HPLA120 Belt Driven, Roller Wheel, Rodless Linear Actuator Features:
• Profile Width : 120mm
• Steel roller bearing option for higher load capacities up 6966N
• Thrust force capacities up to 2235N
• Standard travel up to 9560mm (longer strokes available - consult factory)
• Velocity up to 5 meters/sec
• Positional repeatability of +/- 0.2mm
• Rugged construction for heavy duty applications
• Timing belt and pulley drive mechanism for fast, accurate positioning
• Seal Strip (IP30) for additional environmental protection 
• Low wear and low particle generation (clean room suitable to class 100)
• T-slot mounting along actuator body and carriage

派克PARKER电动执行器HPLA120 美国PARKER执行器现货供应 性能特点：
系列 HPLA
轮廓宽度 (MM) 120
传动类型 Belt
轴承类型 Roller Wheel - Polyamide (Steel option for high load)
zui大行程 (MM) 9560 (single profile) / 20000 (max by splicing)
zui大行程 (IN) 376 (single profile) / 787 (max by splicing)
zui大速度 (M/S2) 5
zui大速度 (IN/S) 200
zui大加速度 (M/S2) 10
zui大加速度 (IN/S2) 393
zui大推力 FX (N) 2235
zui大推力 FX (LBS) 502
典型有效载荷 FZ (N) 250 - 6966
zui大有效载荷 FZ (N) 2646 (Polyamide) | 6966 (Steel)
位置重复性 (+/- MM) 0.2
位置重复性 (+/- IN) 0.008
惰轮装置选件 Yes
其他保护选项 Steel Strip Cover
耐腐蚀选件 Yes (stainless steel)
证书 Cleanroom Certified (up to Class 100 / ISO Class 5)
线性回馈设备 Optional
东莞市巴菲特自动化设备有限公司经销
：



：
：

：523000
地址：广东省东莞市南城区宏远1号宏酒店商务楼14楼13A11