ChemTron NR-6000 中低压反应釜套装

中低压反应釜套装 NR-6000

釜体单层结构无底阀( 可以带内衬)

5860050

NR-6000

反应釜套装

SS

NR-6000 Set of basic reactor made of SS 316TI , volume 6800mL for usage with or without PTFE-lining.Includes reactor vessel with lid made of SS 316TI, O-seal ring (FPM,217x5,0mm), manual quick-lock closure ring, standard fittings( rupture disc made of Monel, 25bar, with rupture disc holder and vent valve,nominal width 4mm), two handles and connection ports for heating/cooling coil (2x 6mm connections),magnetic clutch RV-400 (1x M48 connection) as well as two 8mm swagelok connections

釜体单层结构带底阀( 无内衬)

5860050

NR-6000

反应釜套装

SS BV

NR-6000 Set of basic reactor made of SS 316TI , volume 6800mL for usage with bottom drain valve.Includes reactor vessel with lid made of SS 316TI, O-seal ring (FPM,217x5,0mm), manual quick-lock closure ring, standard fittings( rupture disc made of Monel, 25bar, with rupture disc holder and vent valve, nominal width 4mm), two handles and connection ports for heating/cooling coil (2x 6mm connections),magnetic clutch RV-400 (1x M48 connection), bottom drain valve as well as two 8mm swagelok connections.

釜体夹套结构无底阀( 可以带内衬)

5860060

NR-6000

反应釜套装

SS J

NR-6000 Set of basic reactor made of SS 316TI with jacket, volume 6800mL for usage with or without PTFE-lining.Includes reactor vessel with welded-on and isolated jacket for heating/cooling with circulation heater/cooler, lid made of SS 316TI, O-seal ring (FPM, 217x5,0mm), manual quick-lock closure ring, standard fittings( rupture disc made of Monel, 25bar, with rupture disc holder and vent valve,nominal width 4mm), two handles and connection ports for heating/cooling coil(2x 6mm connections),magnetic clutch RV-400 (1x M48 connection) as well as two 8mm swagelok connections.

釜体夹套结构带底阀( 无内衬)

5860065

NR-6000

反应釜套装

SS J BV

NR-6000 Set of basic reactor made of SS 316TI with jacket, volume 6800mL for usage with bottom drain valve.Includes reactor vessel with welded-on and isolated jacket for heating/cooling with Circulation heater/cooler, lid made of SS 316TI, O-seal ring (FPM,217x5,0mm), manual quicklock

closure ring, standard fittings( rupture disc made of Monel, 25bar, with rupture disc holder and vent valve,nominal width 4mm), two handles and connection ports for heating/cooling coil (2x 6mm connections),magnetic clutch RV-400 (1x M48 connection), bottom drain valve as well as two 8mm

swagelok connections.

釜体内衬

5860100

NR-6000 PTFE

内衬

NR-6000 PTFE-linig consisting of lid-lining, lining of dip-tube, PTFE O-Ring (197x5,0mm) and PTFE-insert (6000ml) (Working termperature Tmax > 230℃ )仅适合无底阀反应釜使用

通用附件

5727090

RV 100 磁耦轴承

Magnetic clutch RV 100/SS (torque 100 Ncm, 300 ℃ ,max. 4000 mPas (1.5 cP) at 10,000ml, made of SS) foruse with anchor stirrer made of SS 316 TI

5727400

RV-400 SS 磁耦轴承

Magnetic clutch RV 400 made of SS 316 TI with Reed contact, torque 400 Ncm, 300℃ , EX-proof zone 1

5945920

锚式搅拌浆，SS

Anchor stirrer made of SS 316 TI

5701017

PTFE 高压泄压管

PTFE High pressure tubing (2.5m; ID 9mm; 550bar)

Exhaust tubing for rupture discs, G3/8" female (inlet)-G 3/8" male (outlet)

5708198

O- 型圈

O-ring 157×4 mm made of Viton for reactors without PTFE-lining

5751455

爆破片 25bar

Rupture disc made of Monel, D 24mm, 25bar with PFA protection foil and certificate

其他可选配件、备用件

阀门

不同材质的底部排水阀及氧气阀门可选

压力测量

多型号压力表和压力传感器可选

加热/ 冷却盘管

不锈钢材质，另有带PTFE涂层的盘管可选

磁耦合传动轴堵头

不锈钢材质和带PTFE涂层的不锈钢堵头可选

通用附件

高压管路、泄压阀、氧气阀门、液体进样、

加热搅拌单元

多型号顶置式搅拌、搅拌桨、温度控制器、加热套、恒温夹套、热电偶传感器可选

搅拌单元安装附件

弹性联轴器、电机固定架、磁耦合传动轴等附件可选

升降支架

For a functioning configuration one lid fixation and one reactor fixation are needed beside the basic lift system.多型号整体升降支架可选，

O 型圈

O-Ring ，多材质可选

CR5706000

回流冷凝管

Reflux Condenser for NR-6000 DN50 600mm

CR5703001

Cooling Fin

Cooling Fin 600mm