QQ交谈培养摇瓶SHAKE FLASKS培养摇瓶SHAKE FLASKS
- 公司名称：
- 更新时间：
- 所 在 地：
- 生产地址：
- 浏览次数：
- 上海君翼仪器设备有限公司
- 2016-05-30 03:32:04
- 上海市
- 培养摇瓶SHAKE FLASKS
- 2342
【简单介绍】
品牌 : 美国Chemglass
备注 : 各种款式摇瓶SHAKE FLASKS，适用于微生物等培养，一般是实验室水平的发酵，发酵量较小，用于实验通途。也是大型发酵前期种子培养的方式。
【详细说明】
各种款式摇瓶SHAKE FLASKS，适用于微生物等培养，一般是实验室水平的发酵，发酵量较小，用于实验通途。也是大型发酵前期种子培养的方式。
CLS-2040
SHAKE FLASKS, 3 STANDARD BAFFLES, REINFORCED TOP
Baffle indents on the lower outside edge of the flask to help oxygen transfer to the culture medium when used on an orbital shaker.
| Item Number | Item Description | PQ |
| CLS-2040-01 | Flask, Shake, 125mL, Baffled, Plain Top, Approx OD x Height （mm）: 70 x 115 | EACH |
| CLS-2040-02 | Flask, Shake, 250mL, Baffled, Plain Top, Approx OD x Height （mm）: 80 x 135 | EACH |
| CLS-2040-05 | Flask, Shake, 1000mL, Baffled, Plain Top, Approx OD x Height （mm）: 130 x 215 | EACH |
| CLS-2040-07 | Flask, Shake, 2000mL, Baffled, Plain Top, Approx OD x Height （mm）: 155 x 270 | EACH |
CLS-2042
SHAKE FLASKS, 3 DEEP BAFFLES, REINFORCED TOP
Extra deep baffle indents on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker.
| Item Number | Item Description | PQ |
| CLS-2042-02 | Flask, Shake, 250mL, Deep Baffles, Plain Top, Approx OD x Height （mm）: 80 x 135 | EACH |
| CLS-2042-04 | Flask, Shake, 500mL, Deep Baffles, Plain Top, Approx OD x Height （mm）: 100 x 180 | EACH |
| CLS-2042-05 | Flask, Shake, 1000mL, Deep Baffles, Plain Top, Approx OD x Height （mm）: 130 x 215 | EACH |
| CLS-2042-07 | Flask, Shake, 2000mL, Deep Baffles, Plain Top, Approx OD x Height （mm）: 155 x 270 | EACH |
CLS-2044
SHAKE FLASKS, 3 STANDARD BAFFLES, DELONG NECK
Baffle indents on the lower outside edge of the flask to help oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.
| Item Number | Item Description | PQ |
| CLS-2044-01 | Flask, Shake, 50mL, Baffled, Delong Neck, Approx OD x Height （mm）: 50 x 110 | EACH |
| CLS-2044-02 | Flask, Shake, 125mL, Baffled, Delong Neck, Approx OD x Height （mm）: 70 x 145 | EACH |
| CLS-2044-03 | Flask, Shake, 250mL, Baffled, Delong Neck, Approx OD x Height （mm）: 80 x 155 | EACH |
| CLS-2044-05 | Flask, Shake, 500mL, Baffled, Delong Neck, Approx OD x Height （mm）: 100 x 200 | EACH |
| CLS-2044-06 | Flask, Shake, 1000mL, Baffled, Delong Neck, Approx OD x Height （mm）: 130 x 230 | EACH |
| CLS-2044-08 | Flask, Shake, 2000mL, Baffled, Delong Neck, Approx OD x Height （mm）: 155 x 300 | EACH |
CLS-2046
SHAKE FLASKS, 3 DEEP BAFFLES, DELONG NECK
Extra deep baffle indents on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.
| Item Number | Item Description | PQ |
| CLS-2046-01 | Flask, Shake, 50mL, Deep Baffles, Delong Neck, Approx OD x Height （mm）: 50 x 110 | EACH |
| CLS-2046-02 | Flask, Shake, 125mL, Deep Baffles, Delong Neck, Approx OD x Height （mm）: 70 x 145 | EACH |
| CLS-2046-03 | Flask, Shake, 250mL, Deep Baffles, Delong Neck, Approx OD x Height （mm）: 80 x 155 | EACH |
| CLS-2046-05 | Flask, Shake, 500mL, Deep Baffles, Delong Neck, Approx OD x Height （mm）: 100 x 200 | EACH |
| CLS-2046-06 | Flask, Shake, 1000mL, Deep Baffles, Delong Neck, Approx OD x Height （mm）: 130 x 230 | EACH |
| CLS-2046-08 | Flask, Shake, 2000mL, Deep Baffles, Delong Neck, Approx OD x Height （mm）: 155 x 300 | EACH |
| CLS-2046-09 | Flask, Shake, 3000mL, Deep Baffles, Delong Neck, Approx OD x Height （mm）: 185 x 340 | EACH |
| CLS-2046-10 | Flask, Shake, 4000mL, Deep Baffles, Delong Neck, Approx OD x Height （mm）: 205 x 370 | EACH |
CLS-2048
SHAKE FLASKS, 6 BAFFLES, DELONG NECK
Flask has 6 baffles, 3 baffles on the lower outside edge of the flask and 3 baffles on the bottom surface of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.
| Item Number | Item Description | PQ |
| CLS-2048-04 | Flask, Shake, 250mL, 6 Baffles, Delong Neck, Approx OD x Height （mm）: 80 x 155 | EACH |
| CLS-2048-05 | Flask, Shake, 500mL, 6 Baffles, Delong Neck, Approx OD x Height （mm）: 100 x 200 | EACH |
| CLS-2048-06 | Flask, Shake, 1000mL, 6 Baffles, Delong Neck, Approx OD x Height （mm）: 130 x 230 | EACH |
| CLS-2048-08 | Flask, Shake, 2000mL, 6 Baffles, Delong Neck, Approx OD x Height （mm）: 155 x 300 | EACH |
| CLS-2048-09 | Flask, Shake, 3000mL, 6 Baffles, Delong Neck, Approx OD x Height （mm）: 185 x 340 | EACH |
| CLS-2048-10 | Flask, Shake, 4000mL, 6 Baffles, Delong Neck, Approx OD x Height （mm）: 205 x 370 | EACH |
CLS-2050
SHAKE FLASKS, 4 BAFFLES, CONSTRICTION, DELONG NECK
Flask has 4 bottom baffles and a constriction just below the neck to prevent splashing from reaching the closure.
| Item Number | Item Description | PQ |
| CLS-2050-02 | Flask, Shake, 250mL, 4 Baffles, Constriction, Delong Neck, Approx OD x Height （mm）: 80 x 155 | EACH |
| CLS-2050-04 | Flask, Shake, 500mL, 4 Baffles, Constriction, Delong Neck, Approx OD x Height （mm）: 100 x 200 | EACH |
| CLS-2050-06 | Flask, Shake, 1000mL, 4 Baffles, Constriction, Delong Neck, Approx OD x Height （mm）: 130 x 230 | EACH |
CLS-2051
SHAKE FLASKS, 3 BAFFLES, GL THREAD, VENTED CAP
Flask has 3 baffles on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. The polypropylene vented caps have a 0.22µm （PTFE） hydrophobic membrane to allow sterile gas exchange while preventing contamination. Since these caps are vented, the flasks can be autoclaved with the cap attached.
| Item Number | Item Description | PQ |
| CLS-2051-02 | Flask, Shake, 125mL, 3 Baffles, GL-32 Thread, Vented Cap, Approx OD x Height （mm）: 65 x 120 | EACH |
| CLS-2051-04 | Flask, Shake, 250mL, 3 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height （mm）: 80 x 125 | EACH |
| CLS-2051-06 | Flask, Shake, 500mL, 3 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height （mm）: 100 x 170 | EACH |
| CLS-2051-08 | Flask, Shake, 1000mL, 3 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height （mm）: 130 x 215 | EACH |
| CLS-2051-10 | Flask, Shake, 2000mL, 3 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height （mm）: 170 x 270 | EACH |
| CLS-1484-10 | Cap, GL-45, Vented, Gray, Non-Sterile | |
CLS-2052
SHAKE FLASKS, 6 BAFFLES, GL-45 THREAD, VENTED CAP
Flask has 6 baffles, 3 baffles on the lower outside edge of the flask and 3 baffles on the bottom surface of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Gray polypropylene vented cap has a 0.22µm （PTFE） hydrophobic membrane to allow gas exchange while preventing contamination. They have a liner-less plug seal design for efficient sealing. They are autoclavable at 121°C. Since these caps are vented, the flasks can be autoclaved with the cap attached.
| Item Number | Item Description | PQ |
| CLS-2052-04 | Flask, Shake, 250mL, 6 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height （mm）: 80 x 125 | EACH |
| CLS-2052-06 | Flask, Shake, 500mL, 6 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height （mm）: 100 x 170 | EACH |
| CLS-2052-08 | Flask, Shake, 1000mL, 6 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height （mm）: 130 x 215 | EACH |
| CLS-2052-10 | Flask, Shake, 2000mL, 6 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height （mm）: 170 x 270 | EACH |
CLS-1490
CLOSURES, SILICONE SPONGE
The silicone sponge closure is manufactured with a sealed in .2 micron silicone sponge filter. Flange fits snugly over the necks of vessels permitting the exchange of gases, while reducing evaporation and preventing the passing of aerosols. Ideal for use with aerobic cultures. Reusable, autoclavable and will withstand dry heat sterilization up to 180°. Closure will withstand both dry heat sterilization and repeated autoclaving.
CLS-1490-013 fits: 13-18mm Culture Tubes and 18mm Screw Necks
CLS-1490-020 fits: 18-25mm Culture Tubes, 25-50mL Erlenmeyer Flasks and 25-125mL Delong® Flasks
CLS-1490-028 fits: 125 and 250mL Erlenmeyer Flasks
CLS-1490-038 fits: 38mm Delong® Style Flask or Tube Necks, 38mm Culture Tubes, 500 and 1000mL Standard Erlenmeyer Flasks and GL-45 Screw Threads
| Item Number | Item Description | PQ |
| CLS-1490-013 | Closure, Silicone Sponge, 13mm | P10 |
| CLS-1490-020 | Closure, Silicone Sponge, 20mm | P10 |
| CLS-1490-028 | Closure, Silicone Sponge, 28mm | P10 |
| CLS-1490-038 | Closure, Silicone Sponge, 38mm | P10 |
CLS-1502
CLOSURES, STAINLESS STEEL
These closures are made from 305 Stainless Steel. They are ideal for use with culture tubes and flasks utilizing Delong Necks. The closure is designed with finger grips to allow it to fit firmly on any Delong Neck. It will withstand both dry heat sterilization and repeated autoclaving.
| Item Number | Item Description | PQ |
| CLS-1502-018 | Closure, 18mm, Stainless Steel | P10 |
| CLS-1502-025 | Closure, 25mm, Stainless Steel | P10 |
| CLS-1502-038 | Closure, 38mm, Stainless Steel | P10 |
CLS-1503
CLOSURES, POLYPROPYLENE
Delong style closure made of polypropylene. Closure offers two positions, open for gas exchange or closed for humidified environment. Internal drip ring minimizes contamination. Autoclavable to 121°C.
| Item Number | Item Description | PQ |
| CLS-1503-09 | Closure, 25mm, Polypropylene | P10 |
| CLS-1503-10 | Closure, 38mm, Polypropylene | P10 |
CLS-1480
CAPS, SOLID, GL-THREADS, POLYPROPYLENE
Solid polypropylene caps with a molded in lip seal. All color caps can be autoclaved in steam to 140°C.
The Premium Clear Caps are made from TpCh260 （similar to PFA） with PTFE coated silicone seal. Premium Cap Compound is formulated without colour dye to avoid risk of leaching. Premium caps can be used in temperatures from -196° to 260°C.
| Item Number | Item Description | PQ |
| CLS-1480-10 | Cap, GL-25, Blue, Solid, Polypropylene | P10 |
| CLS-1480-11 | Cap, GL-32, Blue, Solid, Polypropylene | P10 |
| CLS-1480-12 | Cap, GL-32, Orange, Solid, Polypropylene | P10 |
| CLS-1480-13 | DISCONTINUED: PLEASE SEE CLS-1480-13SC | |
| CLS-1480-13SC | Cap, GL-45, Schott Blue, Solid, Polypropylene | P10 |
| CLS-1480-14 | Cap, GL-45, Gray, Solid, Polypropylene | P10 |
| CLS-1480-15 | Cap, GL-45, Green, Solid, Polypropylene | P10 |
| CLS-1480-16 | Cap, GL-45, Orange, Solid, Polypropylene | P10 |
| CLS-1480-17 | Cap, GL-45, Purple, Solid, Polypropylene | P10 |
| CLS-1480-18 | Cap, GL-45, Yellow, Solid, Polypropylene | P10 |
| CLS-1480-19 | Cap, GL-45, Clear, Solid, Made From TpCh260 （similar to PFA） with PTFE coated silicone seal. Compound formulated without colour dye to avoid risk of leaching. | PK5 |
CLS-1481
CAPS, OPEN TOPS, GL-THREADS, POLYPROPYLENE
Open top polypropylene caps for use with port assemblies. Caps can be autoclaved in steam to 140°C.
| Item Number | Item Description | PQ |
| CLS-1481-20 | Cap, GL-32, Blue, Open Top, Polypropylene | P6 |
| CLS-1481-21 | Cap, GL-45, Blue, Open Top, Polypropylene | P6 |
| CLS-1481-22 | Cap, GL-45, Green, Open Top, Polypropylene | P6 |
| CLS-1481-23 | Cap, GL-45, Yellow, Open Top, Polypropylene | P6 |
CLS-1482
POURING RINGS
Steam autoclavable to 140°C. All pouring rings are polypropylene except for the CLS-1482-30 which is made of high temperature ETFE （Ethylene Tetrafluoroethylene）; max temp is 180°C.
| Item Number | Item Description | PQ |
| CLS-1482-11 | Pouring Ring, GL-32, Blue, Polypropylene | P10 |
| CLS-1482-12 | Pouring Ring, GL-32, Clear, Polypropylene | P10 |
| CLS-1482-13 | Pouring Ring, GL-45, Blue, Polypropylene | P10 |
| CLS-1482-14 | Pouring Ring, GL-45, Green, Polypropylene | P10 |
| CLS-1482-15 | Pouring Ring, GL-45, Gray, Polypropylene | P10 |
| CLS-1482-16 | Pouring Ring, GL-45, Yellow, Polypropylene | P10 |
| CLS-1482-17 | Pouring Ring, GL-45, Clear, Polypropylene | P10 |
| CLS-1482-30 | Pouring Ring, GL-45, Red, ETFE | P10 |
CLS-1484
CAPS, VENTED, POLYPROPYLENE, NON-STERILE
Polypropylene vented cap has a 0.22µm （PTFE） hydrophobic membrane to allow gas exchange while preventing contamination. They have a liner-less plug seal design for efficient sealing. They are autoclavable at 121°C.
| Item Number | Item Description | PQ |
| CLS-1484-25 | Cap, GL-25, Blue, Vented, Non-Sterile, Polypropylene | PK5 |
| CLS-1484-32 | Cap, GL-32, Blue, Vented, Non-Sterile, Polypropylene | PK5 |
| CLS-1484-10 | Cap, GL-45, Gray, Vented, Non-Sterile, Polypropylene | EACH |
| CLS-1484-12 | Cap, GL-45, Blue, Vented, Non-Sterile, Polypropylene | PK5 |
CLS-1486
HIGH TEMPERATURE CAPS, SOLID, PBTE, PTFE SEALS
High temperature PBTE cap will withstand temperature from -45 to 200°C. Complete with PTFE seal.
| Item Number | Item Description | PQ |
| CLS-1486-01 | High Temperature Cap, GL-32, Solid, PBTE | EACH |
| CLS-1486-02 | High Temperature Cap, GL-45, Solid, PBTE | EACH |
相关产品
- CELLine 350美国Wheaton CELLine培养瓶
- Celstir jacket美国Wheaton Celstir双侧臂细胞培养瓶
- 美国Wheaton Magna Flex细胞培养瓶
- Wheaton细胞培养箱
- MINI SMALLWheaton台式桌面滚瓶细胞培养装置
- R2P 2.0WHEATON滚瓶细胞培养装置
- SCHOTT DURAN®培养瓶SCHOTT DURAN® 培养基培养瓶
- SCHOTT DURAN®SCHOTT DURAN®Erlenmeyer培养瓶
- SCHOTT DURAN®培养瓶SCHOTT DURAN®培养基培养瓶
- SCHOTT DURAN®ErlenmeSCHOTT DURAN®Erlenmeyer培养瓶
- SCHOTT DURAN®培养瓶SCHOTT DURAN® 培养瓶
- SCHOTT DURAN®PenicilSCHOTT DURAN®Penicillin培养瓶
- SCHOTT DURAN®培养瓶SCHOTT DURAN®培养瓶
- SCHOTT DURAN®FernbacSCHOTT DURAN®Fernbach圆锥形培养瓶
- SCHOTT DURAN®FernbacSCHOTT DURAN®Fernbach培养瓶
- SCHOTT DURAN® 培养皿
- SCHOTT DURAN®细胞培养瓶SCHOTT DURAN®细胞培养瓶
- SCHOTT DURAN®细胞培养转瓶SCHOTT DURAN®细胞培养转瓶
- ®（一次性）培养管（一次性）培养管
- 转瓶Spinner Flasks转瓶Spinner Flasks
- Fernbach Flas费恩巴赫培养瓶Fernbach Flasks
- 培养摇瓶SHAKE FLASKS培养摇瓶SHAKE FLASKS
请输入产品关键字：
邮编：
联系人：王经理
电话：86-21-67159386
传真：
手机：18621801483
留言：发送留言
个性化：www.shwi.com.cn
网址：www.lab17.com.cn
商铺：https://www.chem17.com/st235541/