113-48DIELECTRIC INK绝缘油墨

113-48DIELECTRIC INK绝缘油墨

说明：113-48是一种极为灵活、电绝缘的油墨、涂料和粘合剂。

通过冲压、丝网印刷、浸渍和注射器分配应用。本产品具有良好的附着力

到卡普顿，聚酯薄膜，玻璃，和其他各种表面。与传统绝缘材料不同，这种产品

非常抗弯曲和折皱。113-48的一些应用包括但不限于绝缘

聚酰亚胺柔性电路、聚合物厚膜电路和薄膜开关。113-48是

104-38岁。

典型固化特性：

稠稠液体

抗皱性佳

体积电阻率（Ω-cm）1 x 1011

介电强度（伏特/密耳）525

硬度（肖氏硬度D）55

抗拉强度（psi）6500

抗撕裂性（磅/英寸）>300

水汽透过率低

建议的处理和固化：113-48已准备好供应使用。进一步变薄可能是

通过添加少量CMI稀释剂102-03和/或醋酸丁酯来完成。性能

大多数应用是在使用200-300瓦/英寸汞蒸气灯进行固化后，再进行

在150°C到180°C下几分钟。典型的固化时间从几秒到一分钟不等，具体取决于

可用能量。通过使用200-300固化剂在多种基材上获得良好的性能

瓦特/英寸汞蒸气灯，随后在50°C至180°C的温度范围内进行后固化。终用户

建议通过实验确定适合个人应用的温度和时间。

储存：保存在密封的不透明容器中，在25℃下保存6个月。

安全和操作：在通风良好的情况下使用。远离火花和明火。避免长时间

接触皮肤和吸入蒸汽。用肥皂和水清洗皮肤。

113-48DIELECTRIC INK绝缘油墨

DESCRIPTION: 113-48 is an extremely flexible, electrically insulating ink, coating and adhesive suitable for
application by stamping, screen printing, dipping and syringe dispensing. This product features excellent adhesion
to Kapton, Mylar, glass, and a variety of other surfaces. Unlike conventional insulating materials, this product is
very resistant to flexing and creasing. Some applications for 113-48 include, but are not limited to, insulating
polyimide flexible circuits, polymer thick film circuitry, and membrane switches. 113-48 is a crosslinking version of
104-38.
TYPICAL CURED PROPERTIES:
 Consistency Thick Liquid
Crease Resistance Excellent
 Volume Resistivity (Ω-cm) 1 x 1011
Dielectric Strength (volts/ mil) 525
 Hardness (Shore D) 55
Tensile Strength (psi) 6500
Tear Resistance (lbs/in) > 300
Moisture Vapor Transmission Low
SUGGESTED HANDLING & CURING: 113-48 is ready to use as supplied. Further thinning may be
accomplished by adding small amounts of CMI Thinner # 102-03 and/or butyl cellosolve acetate. Best properties for
most applications result when cured using a 200-300 watt/inch mercury vapor lamp, followed by a post cure for
several minutes at 150°C to 180°C.Typical cure time varies from a few seconds to a minute, depending on the
amount of energy available. Good properties are obtained on a variety of substrates by curing using a 200-300
watt/inch mercury vapor lamp, followed by a post cure for at temperatures ranging from 50°C to 180°C. End user is
advised to experimentally determine temperature and time best suited for individual applications.
STORAGE: Shelf Life: 6 months at 25°C, when kept in a sealed opaque container.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged
contact with skin and breathing of vapors. Wash with soap and water to remove from skin.