125-10 ELECTRICALLY CONDUCTIVE 导电油墨

125-10 ELECTRICALLY CONDUCTIVE 导电油墨

说明：125-10适于丝网印刷的导电油墨和涂料

以及注射器分配。本产品对卡普顿、聚酯薄膜、玻璃和各种

其他表面。与传统的导电材料不同，这种产品具有很强的抗弯曲和

折痕。125-10的一些应用包括但不限于聚酰亚胺的emi/rfi屏蔽

柔性电路，聚合物厚膜电路，薄膜开关，表面电气附件

钽电容器的安装装置和阳极涂层。对于某些应用，125-10可以

用作一些标准导电油墨的低成本替代品。

典型固化特性：

稠度光滑膏

填料百分比，固化88

抗皱性佳

体积电阻率（Ω-cm）0.00004

片材电阻率（Ω/sq/mil，大值）0.015

可焊性编号

水解稳定性优异

有效温度范围（℃）-55至+200

热稳定性（℃）良好至+325

理论湿覆盖率（in2

/gm/mil）29*

比重2.07

建议的处理和固化：125-10已准备好供应使用。进一步变薄可能是

通过添加少量稀释剂102-03来完成。使用聚碳酸酯时

120-08年。使用前，一定要重新悬浮填料。对于大多数应用程序来说，性能是

当在170°C至180°C下固化几分钟时。在多种

通过在50°C至150°C温度范围内干燥和固化基板。建议终用户

通过实验确定适合个人应用的温度和时间。

贮存期：25℃下保存6个月；5℃下保存9个月；或-10℃下保存12个月。

安全和操作：在通风良好的情况下使用。远离火花和明火。避免

长时间接触皮肤和吸入蒸汽。用肥皂和水清洗皮肤。

125-10 ELECTRICALLY CONDUCTIVE 导电油墨

 DESCRIPTION: 125-10 electrically conductive ink and coating suitable for application by screen printing
and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of
other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and
creasing. Some applications for 125-10 include, but are not limited to, EMI/RFI shielding of polyimide
flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface
mounted devices, and anode coatings for tantalum capacitors. For some applications, 125-10 can be
used as a lower cost alternative to some of our standard conductive inks.
TYPICAL CURED PROPERTIES:
 Consistency Smooth Paste
 Percent Filler, cured 88
 Crease Resistance Excellent
 Volume Resistivity (Ω-cm) 0.00004
 Sheet Resistivity (Ω/sq/mil, MAX.) 0.015
 Solderable No
 Hydrolytic Stability Excellent
 Useful Temperature Range (°C) -55 to +200
 Thermal Stability (°C) Good to +325
Theoretical Wet Coverage (in2
/gm/mil) 29 *
 Specific Gravity 2.07
SUGGESTED HANDLING & CURING: 125-10 is ready to use as supplied. Further thinning may be
accomplished by adding small amounts of thinner 102-03. When working with polycarbonate thin with
120-08. Prior to using, be certain to re-suspend fillers. Best properties, for most applications, result
when cured for several minutes at 170°C to 180°C. Good properties are obtained on a variety of
substrates by drying and curing at temperatures ranging from 50°C to 150°C. End user is advised to
experimentally determine temperature and time best suited for individual applications.
STORAGE: Shelf Life - 6 months at 25°C; or 9 months at 5°C; or 12 months at -10°C.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid
prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.