CP型橡胶止水带价格

CP型橡胶止水带价格

CP型止水带是指中间无孔的中埋式止水带，可分为CP型橡胶止水带、CP型塑料止水带两类。主要适用于各种混凝土构筑物的伸缩缝、沉降缝及防震缝等，具有与混凝土锚固紧密、止水密封和适应变形缝伸缩变形的能力优秀等。
The CP type water stop belt is a medium - buried middle - buried water stop belt, which can be divided into two types, CP type rubber sealing belt and CP type plastic water stop belt. It is mainly applied to expansion joints, settlement joints and earthquake proof joints of all kinds of concrete structures. It has excellent ability to closely anchor with concrete, to seal water and seal and to adapt to deformation and joint expansion and deformation.
CP型止水带是指中间无孔的中埋式止水带，可分为CP型橡胶止水带、CP型塑料止水带两种。主要适用于各种变形量不大的混凝土构筑物的施工缝、*收缩缝、不*收缩缝、伸缩缝等，具有与混凝土锚固紧密、止水密封及弹性拉伸变形等特点。
The CP type water stop belt is a medium - buried middle - buried water stop belt, which can be divided into two types, CP type rubber sealing belt and CP type plastic water stop belt. It is mainly applied to construction joints, complete shrinkage joints, incomplete shrinkage joints and expansion joints of all kinds of concrete structures with small deformation. It has the characteristics of closely anchored with concrete, sealing and elastic deformation.
以保证浇捣密实而且这种复合式止水带还具有双重功能利用工艺将止水带和钢边用细铁丝缠绕固定扯离、扭转时会经常出现橡胶止水带松动和脱落延缓渗水速度
This kind of compound water stop belt has double functions. The process of sealing and twisting the waterstop and the steel edge with thin wire will make rubber water stop loose and fall off, and retard seepage speed.
CP型止水带是指中间无孔的中埋式止水带，可分为CP型橡胶止水带、CP型塑料止水带两种。主要适用于各种变形
The CP type water stop belt is a medium - buried middle - buried water stop belt, which can be divided into two types, CP type rubber sealing belt and CP type plastic water stop belt. It is mainly applicable to all kinds of deformation
量不大的混凝土构筑物的施工缝、*收缩缝、不*收缩缝、伸缩缝等，具有与混凝土锚固紧密、止水密封及弹性
The construction joints, complete shrinkage joints, incomplete shrinkage joints and expansion joints of the small concrete structures are closely anchored with concrete, sealing and elastic.

CP型橡胶止水带价格
拉伸变形等特点，是我公司根据多年生产经验，并结合《给水排水工程混凝土构筑物变形缝设计规程》CECS117：
Tensile deformation and other characteristics are based on many years of production experience, combined with the "design rules for the deformation joints of concrete structures of water and drainage engineering" CECS117:
2000开发生产的一种新型中埋式止水带。
2000 a new type of buried water stop belt was developed and produced.
设计及选用标准：
Design and selection criteria:
在工程设计及施工选用过程中，CP型止水带的宽度及厚度应按以下条件确定。
In the process of engineering design and construction selection, the width and thickness of the CP type water stop belt should be determined according to the following conditions.
1、 水压小于4m,水平和垂直变形量不超过10mm 时，CP型止水带的宽度不宜小于200mm，厚度不宜小于5mm；
1, when the water pressure is less than 4m and the horizontal and vertical deformation is not more than 10mm, the width of the CP type water stop belt should not be less than 200mm, and the thickness should not be less than 5mm.
2、 水压为4-8m，水平和垂直变形量不超过30mm时，CP型止水带的宽度不宜小于300mm，厚度不宜小于6mm；
2. When the water pressure is 4-8M and the horizontal and vertical deformation is not more than 30mm, the width of the CP type water stop belt should not be less than 300mm, and the thickness should not be less than 6mm.
3、 水压大于8m,水平和垂直变形量超过30mm时，CP型止水带的宽度不宜小于350mm ,厚度不宜小于8mm；
3, when the water pressure is more than 8m and the horizontal and vertical deformation exceeds 30mm, the width of the CP type water stop belt should not be less than 350mm, and the thickness should not be less than 8mm.
4、 水压不大于8m,水平变形量不超过20mm，当无垂直变形时，CP型止水带的宽度不宜小于200mm,厚度不宜小于5mm。除此之外，当结构断面尺寸大于500mm时，CP型止水带的宽度不宜小于300mm，当CP型止水带进行弯曲放置时，其转弯半径不得小于300mm。
4, the water pressure is not more than 8m, and the horizontal deformation is not more than 20mm. When there is no vertical deformation, the width of the CP type water stop belt should not be less than 200mm, and the thickness should not be less than 5mm. Besides, when the structural section size is larger than 500mm, the width of the CP type water stop should not be less than 300mm. When the CP type water stop belt is bent, the turning radius should not be less than 300mm.