651 651型橡胶止水带300*6规格

651型橡胶止水带300*6规格

651橡胶止水带是止水带的一种常用型号，属于中埋式止水带，中心孔两侧各有3个突起的楞，651型橡胶止水带是止水带产品里使用zui广泛的止水带。
651 rubber water stop is a common type of water stop belt, belongs to the embedded water stop belt, the center hole has 3 protrusions on each side, and the 651 type rubber water stop strip is the most widely used waterproof strip in the water stop belt product.
651橡胶止水带是止水带的一种常用型号，属于中埋式止水带，中心孔两侧各有3个突起的楞，651型橡胶止水带是止水带产品里使用zui广泛的，常用的中埋式止水带还有652型、653型等。
651 rubber water stop is a common type of water stop belt. It belongs to the embedded water stop belt. There are 3 protrusions on each side of the center hole. The 651 type rubber water stop belt is the most widely used in the water stop belt product, and the commonly used type of embedded water stop belt has 652 type and 653 type.
651橡胶止水带是我公司专业生产橡胶止水带是利用橡胶的高弹性，在各种荷载下产生弹性变形，从而起到坚固密封，有效地防止建筑构造的漏水，渗水并起到减震缓冲作用。
651 rubber waterproof belt is our company specializing in the production of rubber water stop belt is the use of high elasticity of rubber, under various loads to produce elastic deformation, so as to play a strong seal, effectively prevent leakage of building structures, seepage, and play a shock absorber buffer effect.

651型橡胶止水带300*6规格
在许多工程建筑设计中，土建、水土结构之间都有一定的伸缩要求，并存在防水防震等问题，因此采用和安装橡胶止水带是有效地解决以上种种问题的手段。本产品主要用于混凝土现浇时设在施工缝及变形缝内，与混凝土结构成为一体的基础工程、地下设施、隧道涵洞、输水渡槽、挡水坝等，确保工程建设的使用寿命。
In many engineering building design, there are certain expansion requirements between civil engineering, water and soil structure, and there are waterproof, shockproof and other issues, so the use and installation of rubber water stop is an effective means to solve the above problems. This product is mainly used for concrete pouring in the construction joints and deformation joints, and the concrete structure as one of the basic works, underground facilities, tunnel culverts, aqueduct aqueduct, dam, etc., to ensure the construction of the service life.
橡胶止水带的生产*采用国家GB18173.2-2000《高分子防水材料-止水带》标准组织生产的。可按用户要求生产各种止水带形状、尺寸的产品，另外还为不同工程、不同部位的需要备有十字型，丁字型、斜度型和内外转角型橡胶止水带接头产品，可适用于任何设计要求。
The production of rubber water stop belt is compley produced by the national standard GB18173.2-2000 "polymer waterproof material water stop belt". The product can be produced according to the requirements of users, and the products of cross type, T-shaped, inclined type and inner and outer corner type rubber water stop joint can be produced for different engineering and different parts, which can be applied to any design requirement.