GYDC-05 controller enables digital output of 1μm resolution and
also analogue output.
Other features are as options,
-Additional analogue output of magnet velocity
-SSI output and incremental output
GYDC-05 controller can be used with:
GYcRS/GYMR5/GYFRS/GYGS/GYPM/GYHR/GYcRP probes.

Model No.

(1):Digital output
1:Standard (parallel, negative logic, binary code)
2:Incremental output (250kHz)
5A:SSI asynchronous
5S:SSI synchronous

(2):Resolution
D2:0.1mm
D3:0.05mm
D4:0.01mm (Standard)
D5:0.005mm
D7:0.002mm
D8:0.001mm

(3):Direction of output (toward probe tip)
D:output data increase
R:output data decrease

(4):Probe
RS:GYcRS probe
R5:GYMR5 probe
FS:GYFRS probe
GS:GYGS probe (Resolution 0.1mm(D2) only)
PM:GYPM probe (Resolution 0.1mm(D2) only)
RP:GYcRP probe (Resolution 0.1mm(D2) only)
KM:GYKM probe (Resolution 0.1mm(D2) only)
HR:GYHR probe

(5):Effective stroke (mm)

(6):Dead zone length of probe head side (mm)

(7):Analogue position output (OUT1)

*Z＝Zero position *F＝Full scale position

(8):Option:Analogue output (OUT2)
position output:see (7)
velocity output (Note1)
VA[ ]　±10V
WB[ ]　4-20mA
[ ]:max velocity (1.00-999mm/sec)
(ex.9R99:max velocity=9.99mm/sec)
N:No option

(9):Magnet and Float

(Note1)
VA:When magnet stops, output is 0V. When moving toward probe tip, +10V.
WB:When magnet stops, output is 4mA. When moving in any direction, 20mA.

Standard:with mating connector 10136-3000PE(Sumitomo 3M)
Option:mating connector with 3m cable