The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.

Model No.

(1):Effective Stroke
15mm-2500mm

(2):Output
A:0-10V
B:4-20mA
C:others (bipolar etc)

(3):Direction of output
(toward probe tip)
D:output data increase
R:output data decrease

(4):Thread
M:M24xP1.0 (Standard)
N:M18xP1.5
U:3/4-16UNF

(5):Sensor rod diameter
blank:Φ10 (Standard)
8:Φ8
14:Φ13.8

(6):Cable connection
CN:Connector (Standard)
G*:Pigtail type
(*:Cable length [m], Standard:1.5m)
Connector:straight type
Connector:only counter connector is supplied. In case cable needed,specify cable length.

Dimensions

Material probe head:Al diecast, probe rod:SS304
Standard magnet:No.2P. Other magnets are available from Magnet Grouping [B].
The tip dead zone length (70mm) depends on the magnet or float type.
The length of the cable should be less than 10m in case of using the voltage output type
and 100m in case of using the current output type.
Connector:Sanwa SNW-1607-PCF (Material:zinc alloy fluoroplastic)
Applied cable diameter:Φ6.6-Φ7.5
Wire size:Less than 0.5mm2

Connection
1 DC24V
2 NC
3 0V
4 SIG COM
5 Voltage output
6 (Current output)
7 Alarm output
*Shield should be connected with 0V at user sid