HST-X04扫查器

奥林巴斯HST-X04扫查器

奥林巴斯HST-X04飞行时间衍射(TOFD)手动扫描仪提供了一个高效，低成本，多功能的焊缝检测解决方案。

应用程序

•手动部署单轴扫描仪，用于板材、管道和曲面

•适用于管道、压力容器、储罐和结构件

•可在任何方向操作，无论是在平面上还是在51毫米(2英寸)以下的管道上。OD。

数据采集

•记录的结果与OmniScan®

•理想的位置相关的a扫描，b扫描，和回声动态扫描数据收集

•适用于任何有两个UT通道的系统

扫描工具组件

•扫描仪与150毫米帧

•两个10mhz(3毫米元件直径)CentraScan™复合TOFD探头，比传统UT探头的信噪比有所提高

•三套相约楔形与硬质合金穿针和灌溉洞45º,60º,70º操作

•两个LEMO®-Microdot®传感器电缆2.5米长

•两个罗曼兰®成了bnc适配器

•弹簧加载、摩擦驱动和防水的微型轮式编码器，用于x轴或y轴数据编码

•灵活的编码器定位支架

•额外的250毫米框架更广泛的探针中心分离

•有小泡沫垫的手提箱

该HST-X04扫描仪套件可以进一步配置，以适应广泛的奥林巴斯TOFD和脉冲回波探头和楔形，包括复合产品线。

可选的前置放大器工具包

奥林巴斯HST-X04扫查器

零件号:5682 - kit01

Panametrics 5682前置放大器套件包括:

•5682年前置放大器

•2.5 - m LEMO-LEMO电缆

•电力电缆

•9 V电池

•带情况

前置放大器操作与标准 9 V电池或插入OmniScan®提供电力电缆。

The Olympus HST-X04 time-of-flight diffraction (TOFD) manual scanner offers an efficient, low-cost, and versatile weld inspection solution.

Applications

• Manually deployed single-axis scanner for use on plate, pipe, and curved surfaces
• Applicable to pipes, pressure vessels, storage tanks, and structural components
• Operates in any orientation, either on flat surfaces or on pipes up to 51-mm (2 in.) OD.

Data acquisition

• Permanent record of the results with the OmniScan®
• Ideal for position-related A-scan, B-scan, and echo-dynamic scan data collection
• Suitable for any system with 2 UT channels

Scanner Kit Components

• Scanner with 150-mm frame
• Two 10-MHz (3-mm element diameter) CentraScan™ composite TOFD probes offering signal-to-noise ratio improvement over conventional UT probes
• Three sets of ST1 wedges with carbide wear pins and irrigation holes for 45º, 60º, and 70º operation
• Two LEMO®-Microdot® transducer cables 2.5m long
• Two LEMO®-to-BNC adapters
• Spring-loaded, friction-driven, and water proof Mini-Wheel encoder for X-axis or Y-axis data encoding
• Brackets for flexible encoder positioning
• Additional 250-mm frame for wider probe center separation
• Foam-padded carrying case

This HST-X04 Scanner kit can be further configured to fit the broad range of Olympus TOFD and pulse-echo probes and wedges, including the composite product line.

Optional Preamplifier Kit

Part number: 5682-KIT01

The Panametrics 5682 preamplifier kit includes:

• 5682 preamplifier
• 2.5-m LEMO-LEMO cable
• Power cable
• 9 V battery
• Belt case

Preamplifier operates with standard 9 V battery or plugged to OmniScan® with supplied power cable.

Preamplifier specifications

• 30 dB gain
• 50  hours of battery life (continuous discharge)
• Continuous power-level indicator
• 67 dB signal-to-noise ratio
• Weight: 180 g (6.4 oz) with battery
• CE-certified