EC-895美国ND公司ProtoGel Quick-Cast

美国National Diagnostics公司 

ProtoGel Quick-Cast 12%

ProtoGel 液态预制蛋白凝胶（12%）

• Cast a Gel in One Fourth the Time
   
• Eliminates Mixing and Measuring
   
• Ideal for Western Blotting Applications
   
• Precast Convenience without the Precast Price

        Catalog Number: EC-895

• 美国National Diagnosis 研制的12%液态预制蛋白凝胶是一个的液态预制胶产品。
  
   

   1.一瓶液态预制胶搞定配胶，一次成型，不需两次倒胶

  2.为蛋白印迹实验节省时间，同时提高实验重复性

  3.非预制的价格提供预制的便捷

  4.稳定性好，4度保质期达两年
  
   

   12%预制蛋白凝胶溶液可以使制胶时间从2小时缩短至25分钟, 使制胶步骤减少并缩短制胶的时间。只需要简单的量取所需的体积, 加入起始剂，及可倒胶。一次成型， 不需要多步的量取和混合,也不需要在之后制备浓缩胶. 电泳缓冲液和蛋白染色均与普通的蛋白凝胶电泳相同.密闭避光可在4摄氏度保存2年.

   With the introduction of ProtoGel Quick-Cast, the time required for casting gels for protein separation has been reduced from 2 hours to under 25 minutes, and the number of steps involved has been cut from 10 to only 3. With ProtoGel Quick-Cast, simply measure out the amount needed, add initiators and cast the gel. No mixing, no multiple measurements, no need for a second casting to produce a stacking gel.

   ProtoGel Quick-Cast gels are run in standard 1X Tris-Glycine SDS. Electrical parameters will vary from apparatus to apparatus, but typically gels are run at 170V for 60 minutes.
  
  ProtoGel Quick-Cast gels require no special handling after the run.Simply stain according to standard protocols. Storage: ProtoGel Quick-Cast is stable for 24 months when stored tightly capped in the refrigerator （4⁰C）.