14654-30Technovit® Embedding Molds嵌入模具

Technovit® Embedding Molds嵌入模具

An important prerequisite for easy-to-cut specimens is a mold with a special profile which will provide specimen blocks for easy application and simple cutting. This is achieved with Histoform S, an embedding mold composed of new material with a special shape.

All essential requirements such as:

• Material-saving volume
• Easy-to-cut shape
• Unlimited shelf life
• Easy removal of the embedded specimens because of the conical shape and the Teflon® material
• Excellent temperature dissipation by way of refined steel bottom
• Accurate and easy fixing of the specimen blocks byspecial grooves were achieved with Histoform S, in cooperation with renowned users.

Curing temperature measurements have confirmed that at this volume the combination of Teflon and refined steel will result in a considerably lower polymerization temperature.

Three types types are available: the Histoform Q and the Histoform S and the Histoform N. The Histoform Q was developed for the embedding of larger specimens; the characteristics are identical to Histoform S. These PTFE molds allow for easy removal of 10 plastic blocks when using the Histobloc system.

The mold cavities measure 10mm wide x 16mm high x 6.5mm deep in th "S" and 20mm wide x16mm high x10mm deep in the "Q" and in the "N" 9mm W x 18mm H x 5mm D.

易于切割的样品的一个重要先决条件是具有特殊轮廓的模具，该模具将提供样品块以便于应用和简单切割。这是通过Histoform S实现的，这是一种由具有特殊形状的新材料组成的嵌入模具。

所有基本要求，例如：

节省材料量
易于切割的形状
无限的保质期
由于锥形形状和Teflon®材料，可轻松移除嵌入式样品
通过精炼钢底部优异的温度消散
使用Histoform S与用户合作，通过特殊凹槽准确，轻松地固定样品块。
固化温度测量已经证实，在该体积下，特氟隆和精炼钢的组合将导致相当低的聚合温度。

有三种类型：Histoform Q和Histoform S以及Histoform N. Histoform Q用于嵌入较大的标本;其特性与Histoform S相同。使用Histobloc系统时，这些PTFE模具可轻松去除10个塑料块。

模腔尺寸为“S”宽10mm×高16mm×深6.5mm，“Q”和“N”9mm宽×18mm高×5mm深度为20mm宽x16mm高×10mm深。