16046Leit C Plast导电胶浆

Leit C Plast™导电胶浆

carbon base, good conductivity, large specimens
Leit-C-Plast™ is a conductive adhesive paste that can be molded to provide conductive paths to larger non-conductive samples when mounted on a specimen holder for SEM studies. The plasticity is permanent. It is not affected by high vacuum conditions and shows no peaks in energy dispersive X-ray microanalysis. 

Heavy specimens may also be prepared for viewing in a SEM using Tempfix™ （or the Glue Gun - see details in our non-conductive section） and LEIT-C-Plast™. First the specimen is fixed into place with Tempfix™ or the Glue Gun. Afterward, an electrically conductive bridge is made between specimen mount and specimen using LEIT-C-Plast™. It is not required to wait for drying because neither adhesive outgasses.
LEIT-C-Plast™ was originally developed for holding specimens on angled specimen holders.
The adhesive is offered in a roll form and is black. Flat plates are provided for working the material. May be applied with a spatula.

碳基，导电性好，标本大
Leit-C-Plast™是一种导电胶粘剂，当安装在样品架上进行SEM研究时，可以模塑成为较大的非导电样品提供导电通路。可塑性是yong久性的。它不受高真空条件的影响，并且在能量色散X射线微量分析中没有显示出峰值。

也可以使用Tempfix™（或胶枪 - 参见我们的非导电部分中的详细信息）和LEIT-C-Plast™，在SEM中准备重型样品。首先将样品用Tempfix™或胶枪固定到位。然后，使用LEIT-C-Plast™在样品支架和样品之间制作导电桥。不需要等待干燥，因为粘合剂都不会脱气。
LEIT-C-Plast™初开发用于在有角度的样品架上固定样品。
粘合剂以卷形式提供并且是黑色的。提供平板用于加工材料。可以用刮刀涂抹。