Manual of tabletop centrifuge
- Description:
Centrifuge is a conventional laboratory centrifuge is widely used in biology, chemistry, medicine, education and scientific research and production departments. Centrifuge maximum speed is 4000 rev / min for radioimmunoassay and chromatographic identification, decentralized cells.
- Technical Specifications:
Model | Speed(r/min) | Volume | Time Range | Speed Display | Supply Power | Centrifugal force | Notes |
800 |
Start ~ | 20ml×6 | NO | NO |
220V 50Hz |
1430xg |
|
800B | 20ml×6 |
Open OR 0~60分 | NO | ||||
YXJ-1 | 20ml×6 | NO | |||||
80-1 | 20ml×6 | NO | |||||
80-1A | 20ml×6 | NO | Speed display | ||||
80-2 | 20ml×12 | NO |
| ||||
80-2A |
| 20ml×12 |
| Exist | Speed display | ||
TDL-300 | 50ml×8 | NO |
| ||||
TDL-400 | 100ml×4 | NO | |||||
TDL-400B | 100ml×4 | Exist |
- The use of precautions:
1 Before using this product should read all the instructions.
2 Should be checked before work can work without exceptions.
3 Turned in a load imbalance is prohibited under state operation.
4 It is necessary to properly cover centrifuge machine covered to prevent objects into the damaged machine when running.
5 Replace the fuse, be the first plug from the outlet.
6The table should be flat solid centrifuge, the workplace should be neat and clean, dry and well ventilated, the ambient temperature to 5 ~ 35 ℃ appropriate.
7 The power supply must have a good grounding!
- Instruction:
1 The tube corresponding to the pre-weighing the same hole into the centrifugal.
2 Close the centrifuge lid, set timer time, close the power switch.
3 Adjust speed control, up to the required speed.
4The work is completed, the speed control knob placed on the minimum, put the timer to zero. Turn off the power switch off the power. - Working Principle:
- Packing List:
Name | Quantity | Notes |
Host | 1 |
|
Centrifuge tubes | Depending on the model to check the specifications and quantities |
|
Manual, warranty card, fuse tubes | Each 1 | 800 except |
免责声明
- 凡本网注明“来源:化工仪器网”的所有作品,均为浙江兴旺宝明通网络有限公司-化工仪器网合法拥有版权或有权使用的作品,未经本网授权不得转载、摘编或利用其它方式使用上述作品。已经本网授权使用作品的,应在授权范围内使用,并注明“来源:化工仪器网”。违反上述声明者,本网将追究其相关法律责任。
- 本网转载并注明自其他来源(非化工仪器网)的作品,目的在于传递更多信息,并不代表本网赞同其观点和对其真实性负责,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品第一来源,并自负版权等法律责任。
- 如涉及作品内容、版权等问题,请在作品发表之日起一周内与本网联系,否则视为放弃相关权利。