Supported PLC Types 

PLC2, PLC5, SLC, CLX, CMPLX 

Supported Message Types

PCCC and CIP

Number of Class 3 Client Connections

Connected - 2
Unconnected - 1

Number of Class 1 I/O Connections

8

Max I/O connection sizeIn/Out

496/496 bytes

Max RPI time

10 ms per connection

CIP Services Supported 

0x4C - CIP Data Table Read
0x4D - CIP Data Table Write

Command List

Support for 100 commands per Client, each configurable 
for command type, IP address, register to/from addressing
and word/bit count.

Command Sets 

PLC-2/PLC-3/PLC5 Basic Command Set
PLC5 Binary Command Set
PLC5 ASCII Command Set
SLC500 Command Set

Current Load 

24 VDC nominal @ 300 mA
10 to 36 VDC @ 610 mA maximum 

Operating Temperature 

-25°C to 70°C (-13°F to 158°F)

Storage Temperature 

-40°C to 80°C (-40°F to 176°F)

Shock 

IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational)
IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operational)

Vibration

IEC 60068-2-6; 5G @ 10 to 150 Hz

Relative Humidity

5% to 95% RH with no condensation

Dimensions (H x W x D)

5.38 x 1.99 x 4.38 in
13.67 x 5.05 x 11.13 cm

LED Indicators 

Configuration (CFG), Error (ERR), Power (PWR), 
Hardware Fault (FLT), Network Status (NS), 
EtherNet/IP™ Class I or Class III Connection Status 
(EtherNet/IP Only) Module Status (MS), ModuleConfiguration
Status (EtherNet/IP Only) Ethernet Communication
Port Link/Activity, and 100 mbit

Ethernet Port

10/100Mbit half-duplex RJ45 Connector Electrical Isolation
1500 Vrms at 50 to 60 Hz for 60 seconds, applied as
specified in section 5.3.2 of IEC 60950: 1991 Ethernet
Broadcast Storm Resiliency is less than or equal to
5000 [ARP] frames-per-second and less than or equal to
5 minutes duration

Shipped With Each Unit

2.5 mm screwdriver
J180 Power Connector