ProSoft PLX31-EIP-MBTCP通信模块
ProSoft PLX31-EIP-MBTCP通信模块
※※※ 深圳市扎克贸易有限公司
※※※ 张瑞 188-24-24-3080(V同)
EtherNet/IP to Modbus TCP/IP
PLX31-EIP-MBTCP
ProSoft Technology’s EtherNet/IP™ to Modbus® TCP/IP communication gateway allows high-speed bi-directional data transfers between EtherNet/IP™ enabled controllers or devices and Modbus® TCP/IP controllers or devices.
Our Modbus® TCP/IP driver features multiple client and server functionality, for faster data transmission. In addition, the gateway includes several features, including data prioritization, that allow for simplified integration, reduced commissioning time and optimized performance.
A conformal coating option is available for this product.
Specifications
EtherNet/IP™ Specifications
Specification | Description |
Number of Class 3 Server Connections | 5 |
Supported PLC Types | PLC2, PLC5, SLC, CLX, CMPLX, MICROLX |
Supported Message Types | PCCC and CIP |
Class 3 Client Connections | Connected: 2 |
Number of Class 1 I/O Connections | 2 |
I/O connection sizes | 248/248 |
Max RPI time | 5 ms per connection |
CIP Services Supported | 0x4C - CIP Data Table Read |
Command List | Support for 100 commands per Client, each configurable for command type, IP address, register to/from addressing and word/bit count. |
Command Sets | PLC-2/PLC-3/PLC5 Basic Command Set |
Modbus® TCP/IP Specifications
Specification | Description | |
Supported Modbus Function Codes | 1: Read Coil Status | |
Supported Clients | 10 | |
Supported Servers | MBAP: 5 | |
Command List | Up to 160 fully configurable Client commands | |
Status Data | Error codes reported individually for each command | |
Command List Polling | Each command can be individually enabled or disabled; write-only-on-data-change is available |
免责声明
- 凡本网注明“来源:化工仪器网”的所有作品,均为浙江兴旺宝明通网络有限公司-化工仪器网合法拥有版权或有权使用的作品,未经本网授权不得转载、摘编或利用其它方式使用上述作品。已经本网授权使用作品的,应在授权范围内使用,并注明“来源:化工仪器网”。违反上述声明者,本网将追究其相关法律责任。
- 本网转载并注明自其他来源(非化工仪器网)的作品,目的在于传递更多信息,并不代表本网赞同其观点和对其真实性负责,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品第一来源,并自负版权等法律责任。
- 如涉及作品内容、版权等问题,请在作品发表之日起一周内与本网联系,否则视为放弃相关权利。