2.5L厌氧产气袋日本三菱英文操作说明书，北京缘生化科技有限公司，型号C-1，日本D04

English：

AnaeroPackTM -Anaero

Operation manual of anaerobic gas bag (2.5L)

Product use:

It is used together with sealed tank for the c*tion of anaerobic microorganism. The product can absorb all the O2 in the container and generate about 21% CO2 at the same time.            Each aluminum plastic package contains a piece of paper bag (anaerobic air bag).            usage method:

1. Cut the upper side of the aluminum plastic package and take out the paper bag, which does not need to be opened.

2. Immediately put the paper bag into the sealed tank and cover the sealed tank. It will absorb O2 and generate CO2 immediately after contacting with air. No water or catalyst is required.            3. Each bag of anaeropacktm anaero is used for 2.5L incubator. For the incubator larger than 2.5L, use 2-3 bags according to the volume of the incubator. When using multiple bags of anaeropacktm anaero, do not stack them together.

4. The used anaerobic gas bags may generate heat due to the residual reaction. Please discard them after they become cold. And don't leave it with inflammables.

5. Anaeropacktm - anaero is used for culture under 45 ℃.

Storage method:

Seal and store in a cool and dry place.

Shelf life:

The batch number and expiration date are printed on the lower right corner of the aluminum plastic bag. Please use before the expiration date.

Manufacturer:

Mitsubishi Gas Chemical Co., Ltd

MITSUBISHI GAS CHEMICAL CO., INC.

详细的操作指南以及实验答疑请参考：

北京缘生化科技有限公司