概览
直线系统
径向系统
位移测量系统应用示例
合适的附件 传感器头 磁带
角度测量系统应用示例
合适的附件、插接器与连接导线 传感器头 磁环
快速运行的高精度测量系统, 配备磁编码式直线或旋转量尺 - 用于 高动态性应用中的定位
优势
非接触式、高分辨率、 耐脏
应用
在电动/气动直线驱动装置中 监测滑块位置
在轴体和旋转驱动装置处 探测转速与位置
定位加工单元 (例如激光切割或 水束切割工艺)
磁编码式位移及角度测量系统 - 贴合您的 要求
Keyfeatures
Connection | Cable, 4m, PUR |
---|---|
Operating voltage | 10...30 V DC |
Resolution | 5 µm |
Interface | Square wave signal HLT, Digital interface |
Output signal | Square wave signal HLT |
Design | Series S2B |
Pole width | 5 mm |
Approvals | CE |
General attributes
Area of application | Linear/ Rotary movements |
---|---|
Enclosure Type per IEC 60529 | IP67 |
Protected against polarity reversal | No |
Additional features 1 | Reference signal, single |
Additional features 3 | Real-time capable |
Measuring principle | Incremental system |
Electrical attributes
Connection type | Cable |
---|---|
Output signal | Square wave signal HLT |
Hysteresis H max. | ≤ 7 µm |
Non-linearity (Lin1) | ≤ 50 µm |
Current consumption (at 24 V DC) | < 40 mA |
Overvoltage protected | No |
Interface | Digital interface |
Operating voltage | 10...30 V DC |
Non-linearity max. | ± 40 µm (distance ≥ 1 mm) |
Mechanical attributes
Measurement stroke max. | infinite |
---|---|
Number of conductors | 12 |
Cable length | 4 m |
Conductor cross-section | 0.14 mm² |
Ambient temperature Ta max. | 80 °C |
Ambient temperature Ta min. | -20 °C |
Housing material | PBT |
Cable jacket material | PUR |
Cable diameter max. | 5,6 mm |
Cable diameter min. | 5,3 mm |
Version | 10x25x35 |
Resolution | 5 µm |
Edge separation min. | 24 µs |
Pole width | 5 mm |
Reference signal | Pole-periodic |
Temp. coefficient (steel) | ca. 10.5x10-6/K |
Mounting type | Through-hole 3.5 mm |
Design | Series S2B |
Drag chain compatible | Yes |
Procedure direction | Lengthwise to tape |
Distance to tape min. | 0,01 mm |
Distance to tape max. | 2 mm |
Storage temperature min. | -30 °C |
Storage temperature max. | 85 °C |
Cable temperature max. | +80 °C |
Cable temperature min. | -25 °C |
Cable/connector out | axial |
Bending radius one-time | ≥ 7.5 x cable diameter |
Bending radius repeated | ≥ 15 x cable diameter |
Flame-resistant | IEC 60332/2 |
Traverse speed | 0,65 m/s |
相关产品
免责声明
- 凡本网注明“来源:化工仪器网”的所有作品,均为浙江兴旺宝明通网络有限公司-化工仪器网合法拥有版权或有权使用的作品,未经本网授权不得转载、摘编或利用其它方式使用上述作品。已经本网授权使用作品的,应在授权范围内使用,并注明“来源:化工仪器网”。违反上述声明者,本网将追究其相关法律责任。
- 本网转载并注明自其他来源(非化工仪器网)的作品,目的在于传递更多信息,并不代表本网赞同其观点和对其真实性负责,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品第一来源,并自负版权等法律责任。
- 如涉及作品内容、版权等问题,请在作品发表之日起一周内与本网联系,否则视为放弃相关权利。