产品展厅收藏该商铺

您好 登录 注册

当前位置:
美国布鲁克海文仪器公司>资料下载>Nanobrook Omni测量应用案例-31

资料下载

Nanobrook Omni测量应用案例-31

阅读:405          发布时间:2018-8-13
提 供 商 美国布鲁克海文仪器公司 资料大小 4.8MB
资料图片 下载次数 81次
资料类型 WINRAR 压缩文档 浏览次数 405次
免费下载 点击下载    
 文献名:A Study of the Stability Mechanism of the Dispersed Particle Gel Three-Phase Foam Using the Interfacial Dilational Rheology Method 

作者:Xue Yao,1 Ping Yi,2 Guang Zhao,1 Xin Sun,1 and Caili Dai1

1School of Petroleum Engineering, China University of Petroleum (East China), Qingdao 266580, China

2National Engineering Laboratory for Exploration and Development of Low Permeability Oil and Gas Field, Xian 710018, China;

 

摘要:The dispersed particle gel (DPG) three-phase foam is a novel profile control and flooding system. The stability mechanism of the DPG three-phase foam was studied using an interfacial dilational rheology method. The results show that the elastic modulus of the DPG three-phase foam is up to 14 mN/m, which is much higher than the traditional foam. The increase in interface elasticity produces significantly positive effects on foam stability. Emphasis is given to the influences of frequency, temperature, pressure, and concentration on the viscoelasticity and interfacial adsorption of DPG particles, which change the modules of the foam interface and have a significant effect on foam stability. In addition, the microstructure of the DPG three-phase foam was observed. A viscoelastic shell is formed by the aggregation of the DPG particles on the interface. The irreversible adsorption gives the interface high elasticity and mechanical strength. The electrostatic repulsion between particles increases the spacing between bubbles. The combined effects of these factors give the interface higher mechanical strength, slow down the film drainage, effectively prevent gas permeation, and significantly improve the foam stability.

收藏该商铺

登录 后再收藏

提示

您的留言已提交成功!我们将在第一时间回复您~

对比框

产品对比 产品对比 联系电话 二维码 意见反馈 在线交流

扫一扫访问手机商铺
010-62081908
在线留言