F226:Description:说明:
The level of the DC bus voltage will be monitored by the drive controller. If
the DC bus voltage falls below a minimal threshold, the drive
independently shuts down according to the set error reaction.
直流母线电压的水平将由驱动控制器监控。如果直流母线电压低于最小阈值根据设定的错误反应独立关闭。
Cause:原因:
1. The power source has been interrupted without first switching off
the drive enable (RF).
电源在未首先关闭的情况下中断驱动使能(RF)。
2. Disturbance in the power supply
电源干扰。
Remedy:排查思路:
For 1 Check the logic regarding the activation of the drive within
the connected control.
检查内部驱动器激活的逻辑连接的控件。
For 2 Check the power supply.
检查电源。
The error can be cleared by removing the control enable signal.
可以通过移除控制启用信号来清除错误。
立即询价
您提交后,专属客服将第一时间为您服务