PCU2 mk5

销售：钟    

Features
 20kVA 5 minute output capability
 Continuously variable output
 Multi-function timing system
 Digital true RMS memory
ammeter
 Bright LED displays
 Automatic switch-off at end of test
 Centralised control and metering
 Separate control and loading units
 Output up to 10kA
 Low impedance, dual-range
outputs

The PCU2 Mk5 primary current injection system is ideally
suited to commissioning and maintenance testing where very
high currents are required. The system consists of separate
control and loading units for maximum flexibility. The control
unit contains all control and metering circuitry, and is linked to
the loading unit by control and metering cables.
The control unit may be used with one of two loading units
providing between 5000A or 6000A for 5 minutes or up to 10
or 12kA for short periods. Each loading unit has two outputs
which may be connected in series or parallel for maximum
flexibility. For example, the LU6000 may be configured to
either give a maximum current of 3000A at 6.6V or 6000A at
3.3V.
The control and loading units are each housed in tough steel
cases fitted with castors and protective lifting handles. The
loading units have a small plan area to allow them to be
positioned as close as possible to the test object, minimising
power requirements and maximising the available current.
