BD-PND176石油产品凝点测定仪厂家

BD-PND176石油产品凝点测定仪

该石油产品倾点凝点测定器是引进日本精良技术生产的，符合GB/T 510。该仪器采用压缩机制冷原理，封闭式浴槽，配有倾斜支架及倾点套，并装有智能数字显示控制仪，使用方便、质量可靠，该仪器采用模糊控制原理和PID自整定技术，控制性能稳定可靠，是化验室*的试验仪器。
该仪器制冷系统是由压缩机、过滤器、毛细管节流器、蒸发器及各连接管路组成。制冷剂通过蒸发器吸热膨胀，膨胀后的气体由压缩机压入排气管路形成高温高压气体再进入冷凝器冷却成液体，然后经毛细管节流降压进入蒸发器蒸发吸热从而达到制冷目的。制冷剂蒸发后又被压缩机压入排气管进入冷凝器，这样周而复始地工作实现循环制冷。温度控制系统是由智能数显控温仪进行PID调节实现定点控温，控温仪输出的控制信号触发固态继电器，使加热管工作抵消压缩机制冷系统产生的冷量，使其恒在我们所需要的温度上。

BD-PND176石油产品凝点测定仪

技术指标 ：
制冷温度 ：室温～－75℃ 
降温时间 ：≤100分钟 
输入方式 ：Pt100 
控温精度 ：±0.1℃ 
电源电压 ：AC220V 50Hz
结构形式 ：一槽两孔

BD-PND176石油产品凝点测定仪

BD-PND176 petroleum products pour point analyzer
The determination of the pour point of the pour point of the petroleum products is produced by the introduction of advanced technology from Japan, according to GB / T 510. The instrument uses a compressor refrigeration principle, enclosed bath with tilt stand and pour point sets, and is equipped with inligent digital display controller, easy to use, reliable quality, the instrument uses fuzzy control principle and PID self-tuning technology, control performance stable and reliable, is the the laboratory preferred test instrument.
The refrigeration system is the instrument by the compressor, filter, capillary restrictor, connected to the evaporator and the piping components. Endotherm of the refrigerant through the evaporator expansion pressure by the compressor, the expansion of the gas after the formation of high temperature and high pressure gas into the exhaust pipe and then into the condenser cooling into liquid, and then by capillary throttling into the evaporator evaporation endothermic to achieve refrigeration purposes . Compressor pressure refrigerant evaporates then into the exhaust pipe into the condenser, so the cycle refrigeration cycle to work. The temperature control system is noticeable by the inligent digital temperature control device PID adjustment to achieve the fixed-point temperature control, temperature control device output control signal to trigger solid-state relays, heating pipe work offset compressor refrigeration system to produce cold it constant in on the required temperature.

Technical indicators:
Refrigeration temperature: room temperature ~ -75 ℃
Cooling time: ≤ 100 minutes
Input mode: Pt100
Temperature control accuracy: ± 0.1 ℃
Power supply voltage: AC220V 50Hz
Structural forms: a slot two holes