进口威格士电磁阀，DG4V-5-OBJ-VM-U-H6-20 返回列表页

进口威格士电磁阀，DG4V-5-OBJ-VM-U-H6-20
Note: These charts are based on the inlet pressure being at
least 10,3 bar (150 psi) higher than the outlet reduced pressure.
注：本表作为在选择合适的安装螺栓长度模块的各种组合的指南。之后，
电路开发和堆叠的组件是预定的，添加所需的长度加上20,6毫米（.81英寸）
螺纹啮合的底板或集成块。选择适当的英制
螺纹的螺栓和order by的螺栓套件数量。所有的螺栓套件
包括六（6）内六角螺钉和六（6）防松垫圈4,4毫米（0.17英寸）厚。
使用两个（2）螺栓是可选的。所有六
Scope An aid to commissioning specified Vickers proportional
valves, amplifiers and their applications. Checks and
measurements of their parameters can be made.
Measurement and/or command signal input sockets
进口威格士电磁阀，DG4V-5-OBJ-VM-U-H6-20
Connector for Vickers amplifier
Connector to machine electrics or Vickers proportional valves
110/130/220/240V (+10 to ?5%) AC 50/60 Hz (100 VA max.)
24V DC (40W max.) internally from AC/DC converter or
externally from application electrics. Panel-mounted
Panel-mounted switch. Internal or application source; LED
Digital voltmeter (DVM), 3.5-digit display. Panel-mounted.
Two-range timer offering selection of 0-1 or 0-10 sec ranges.
Two independent panel-mounted potentiometers with polarity
Three independent panel-mounted switches and output
44 x ?2 (0.0787 dia.) sockets, access to DIN 41612 F48
DIN 41612 F48 edge connector.
DIN 41612 F48 edge connector for flying leads.
Standard enclosure with carrying handle.
（6）螺栓被为140巴（2000 psi）的压力210 bar的压力范围
（3000磅）的zui大密封的使用寿命。
叠加阀, 规格 3, ISO 4401-03; NFPA-D03; 315 bar
(4500 psi); 60 L/min (15.7 USgpm), DGMC
 D03, DGMX2 D03, DGMR D03 样本 中文
叠加阀, 规格 5 (替换为 649 REV 11/97)", ISO 4401 -05
 规格, 315 bar (4500 psi) 和 120 l/min (32 USgp
m) 压力溢流和减压, 顺序卸压 样本 中文
SystemStak™ 叠加阀：规格 7 （NG 16） 工业阀
   产品说明 样本类型 PDF 样本编号
DGM** 7, ISO 4401 规格 07; 315 bar (4500 p
si); 等于 200 L/min (53 USgpm) 叠加阀 (替换为 D-V-435,517,719,436)"