he universal cover clamps CR1800

he universal cover clamps CR1800

he universal cover clamps CR1800

通用盖夹CR1800有4个位置，允许堆叠多达3或4个浅或半深微孔板+盖（因此每个全夹多12或16个板）。盖夹可以安装在一系列供应商提供的轨道振动平台上。自2013年3月以来，所有通用卡箍都配备了改进的拧紧系统。十字螺母可以更容易地拧紧，弹簧系统将施加的力限制在400牛顿左右，这非常适合带固体硅胶的三明治盖。对于海绵状硅酮夹心盖，我们建议先大限度地拧紧夹钳系统，然后松开十字螺母半圈或全圈（180-360度）。在大多数振动平台上，可以连续安装4个夹钳，因此可以孵化48或64个微孔板+盖。自2014年以来，我们还提供4位夹具和稍大一点的接地板，可以夹在Kuhner振动筛的EPFL台上（订单号：CR1800c）。我们还提供2位通用盖夹具（CR1600）

he universal cover clamps CR1800 have 4 positions and allow the stacking of up to three or four shallow or half-deepwell microplates + covers (hence a maximum of 12 or 16 plates per full clamp). The cover clamp can be mounted on orbital shaking platforms from a range of suppliers. Since March 2013, all universal clamps are equipped with an improved tightening system. The cross-nut allows easier tightening, and a spring-system limits the force excerted to ~400 Newton, which is perfect for sandwich covers with solid silicone. For sandwich covers with spongy silicone, we advice to first tighten the clamp system maximally, but then to release the cross-nut a half or full turn (180-360 degrees).On most shaking platforms, 4 clamps can be mounted in a row, so allowing the incubation of 48 or 64 microplates + covers.Since 2014, we also supply such 4-position clamps with a slightly larger groundplate, that allows clamping onto EPFL tables from Kuhner shakers (order number: CR1800c).We also supply universal cover clamps with 2 positions (CR1600)

注：杨清辰发布