Multi-Channel Systems多通道系统

Multi-Channel Systems多通道系统
多通道系统控制和处理样品

计算机化的设置/机器人以小体积操作环境-例如，围绕活样本。

微型尺寸允许您直接在显微镜台上处理样品。既然你不必

从显微镜阶段取出样品，这可用于在

比如在治疗后。可用于任何电池室，包括LabTek室

Nunc和多孔板的护目镜。小2通道配置包括2通道

溶液处理单元和8通道溶液开关可混合多达8种不同的溶液。

Multi-Channel Systems多通道系统

Multi-Channel Systems多通道系统

多通道系统控制和处理样品

计算机化的设置/机器人以小体积操作环境-例如，围绕活样本。

微型尺寸允许您直接在显微镜台上处理样品。既然你不必

从显微镜阶段取出样品，这可用于在

比如在治疗后。可用于任何电池室，包括LabTek室

Nunc和多孔板的护目镜。小2通道配置包括2通道

溶液处理单元和8通道溶液开关可混合多达8种不同的溶液。系统

可进行配置，以确保关键成分/试剂之间没有污染。随附

安装在新的戴尔笔记本电脑上的控制软件。可以为任何协议预先编程，

包括细胞染色和标记。温度和气体环境控制系统

可用。

Multi-Channel Systems to Control and Process Samples This is a
computerized setup/robot to manipulate environment in small volumes - around live samples, for example.
The miniature size allows you to process samples directly on microscope stages. Since you do not have to
remove samples from the microscope stage, this can be used to relate live and processed samples before
and after treatment, for example. Can be used with any cell chambers, including LabTek chambered
coverglasses from Nunc and multi-well plates. The minimum 2-channel configuration includes 2-channel
solution handling unit and 8-channel solution switch to mix up to eight different solutions. The system
can be configured so that there is no contamination between critical components/reagents. Shipped with
control software installed on a new Dell laptop/notebook computer. Can be preprogrammed for any protocol,
including cell staining and labeling. Systems with temperature and gas environment control are also
available.

 注：杨清辰发布