Syringe Holder注射器支架SH-1A

Syringe Holder注射器支架SH-1A
注射器支架，防振，SH-1A这是一个通用的0.5英寸。站起来。安装

基底抑制灌注系统的振动，使其通过显微镜检查台。多次安装

选项：该支架可以安装到表面与M8螺纹孔。它还包括两个方面，一个是

将保持架放在非磁性表面和强磁性底座上。包括三个0.5英寸。职位，其中

允许您将支架延伸至3英尺高。高到足够的高度，这个支架可以用来

动物灌注

Syringe Holder注射器支架SH-1A

Syringe Holder注射器支架SH-1A

注射器支架，防振，SH-1A这是一个通用的0.5英寸。站起来。安装

基底抑制灌注系统的振动，使其通过显微镜检查台。多次安装

选项：该支架可以安装到表面与M8螺纹孔。它还包括两个方面，一个是

将保持架放在非磁性表面和强磁性底座上。包括三个0.5英寸。职位，其中

允许您将支架延伸至3英尺高。高到足够的高度，这个支架可以用来

动物灌注，如果与手动流量控制阀相结合（见下文）。配有SH-10注射器

用于50-60毫升注射器的支架，以及16个用于小容量注射器的适配器。包括八个截止阀和

适合1/16英寸。一、 D.软管。磁基直径只有2.50英寸。包括50英尺的塔贡

油管。项目#：SH-1A

Syringe Holder, Anti-Vibration, SH-1A This is a universal 0.5in. stand. The mounting
base inhibits vibrations from perfusion systems to pass through microscope tables. Several mounting
options: the stand can be mounted to surfaces with M8 threaded holes. It also includes both, a stand to
place the holder on non-magnetic surfaces, and a strong magnetic base. Includes three 0.5in. posts, which
allow you to extend the holder up to 3 feet high. Elevated to sufficient height, this stand can be used for
animal perfusion, if combined with manual flow control valves (see below). Comes with SH-10 syringe
holder for 50-60ml syringes, and 16 adapters for smaller volume syringes. Includes eight stop-cocks and
fitting for 1/16 in. I.D. soft tubing. The magnetic base diameter is only 2.50 in. Includes 50 feet of Tygon
tubing. Item#: SH-1A

 注：杨清辰发布