Delivery System小容量传输系统SVDS1

Delivery System小容量传输系统SVDS1

Delivery System小容量传输系统SVDS1

小容量传输系统SVDS1，用于小型腔室、芯片实验室和

细胞内灌注。可用于微型流形，灌注系统。需要加压气体

提供解决方案。也可以使用控制流量或真空系统提取溶液。可以使用

通过抽吸收集样品。

大多数可用的灌注系统都有很长的管道，必须在灌注前进行灌注

进行实验。然而，有时使用的物质只有有限的数量或

是非常昂贵的，禁止使用常规灌注。这个系统使用小塑料

带锥形底部和薄聚四氟乙烯管的管道，以连接到您的设置。它只需100

微升的灌流液。带有溶液的管子只需拧入保持架即可。溶液容易补充

在实验中。该系统配有所有必要的管道和接头，以连接到单一压力

来源，如果需要。91 x 48 x 17 mm的小尺寸（不带管道）允许定位溶液

靠近你的样品。可连接到1英尺长的杆（包括在内）。带有X-块以连接到标准

0.5英寸。站起来。车身有6.5毫米的内径开口，可以将系统安装在微操作器上。

包括可更换的塑料管2/3.5ml、聚四氟乙烯管、接头和连接到压力源的管。

订购时。项目：SVDS1

Small Volume Delivery System SVDS1 For use with small chambers, lab-on-chips, and
intracellular perfusion. Can be used with miniature manifolds, perfusion systems. Requires pressurized gas to
deliver the solutions. Solutions can be also withdrawn using controlled flow or vacuum systems. Can be used
to collect samples by aspiration.
The majority of available perfusion systems have long lines of tubing, which have to be filled before
conducting experiments. However, sometimes applied substances are available only in limited quantities or
are extremely expensive, prohibiting the usage of conventional perfusion. This system utilizes small plastic
tubes with conical bottom and thin PTFE tubing to connect to your setup. It can be used with as little as 100
µl volumes of perfusate. Tubes with solutions are simply threaded into the holder. Solutions are easy to refill
during the experiment. The system comes with all necessary tubing and fitting to connect to a single pressure
source, if required. The small size of 91 x 48 x 17 mm (without tubing attached) allows to position solutions
near your sample. Can be attached to a 1 ft. rod (included). Comes with X-block to attach onto a standard
0.5 in. stand. The body has 6.5 mm I.D. opening, which allows to mount the system on a micromanipulator.
Includes replaceable plastic tubes 2/3.5ml, PTFE tubing, fitting and tubing to connect to a pressure source.
when ordering. Item#: SVDS1

 注：杨清辰发布