Dosing System4通道可编程加药系统CFPS-2

Dosing System4通道可编程加药系统CFPS-2

Dosing System4通道可编程加药系统CFPS-2

4通道可编程加药系统，CFPS-2

•流量控制：手动拨号，模拟信号（-5）

-+5V），通过RS232/USB进行软件控制

端口，反向

•遥控：无线通道开关

打开/关闭并启动编程序列

•计时器：1秒精度，多超过

每个频道24小时

•可编程音量：可编程

输送量高达999.9ml

•可编程序列：可编程

按顺序激活通道

具有可编程延迟

•连续交付：可编程为

定容连续输送液体/

时间和期限

•尺寸：4x2.5x1.85英寸。

•电源：110/230VAC

•安装：0.5英寸。1英尺杆和x形块

•配件：带刺鲁尔锁

•蠕动管：0.015英寸。一、 直径：0.020英寸。

一、 直径；0.031英寸内径；0.062英寸。一、 直径：0.093英寸。一、 D。

这是一个双通道灌注系统，用于控制溶液流速从8微升/分钟到7.3毫升/分钟

（或选择下面的升级，以获得高22ml/min的不同流速）。包括4通道可编程

控制器，允许升级到4通道系统。精密设计，缩小尺寸

提供平滑灌注的脉动。设计用于在

成像、记录、钙和其他离子测量、生化分析或小器官和动物

灌注。用于实验室芯片设置、成像和记录工作站中的小腔室。

数字接口和模拟输入允许您独立校准每个通道并应用一个或

通过手动或通过数据采集和成像软件切换通道的多种物质。

控制器可使用每个频道的定时器进行编程，或分配预设音量。它也

4-Channel Programmable Dosing System, CFPS-2
• Flow control: manual dial, analog signal (-5
- +5V), software control through RS232/USB
port, reverse direction
• Remote control: wireless channel switch
ON/OFF and to start programmed sequences
• Timers: 1sec accuracy, up to more than
24hours for each channel
• Programmable Volume: Can be programmed
to deliver volumes, up to 999.9ml
• Programmable Sequences: Can be programmed
to activate channels in sequences
with programmable delays
• Continuous Delivery: Can be programmed to
deliver liquid continuously with set volume/
time and period
• Dimensions: 4x2.5x1.85 in.
• Power: 110/230VAC
• Mounting: 0.5in. 1 ft. rod and x-block
• Fitting: barbed luer-locks
• Peristaltic Tubing: 0.015in. I.D.; 0.020in.
I.D.; 0.031in I.D.; 0.062in. I.D.; 0.093in. I.D.
This is a 2-channel perfusion system for precise control of solution flow rate from 8 µl/min to 7.3 ml/min
(or choose upgrades below for different flow rates up to 22ml/min). Includes a 4-channel programmable
controller, which allows upgrade to a 4-channel system. Precision design and miniature size minimize
pulsations to provide smooth perfusion. Designed for stable solution flow or substance application during
imaging, recording, calcium and other ions measurement, biochemical assays or small organs and animals
perfusion. Used with small chambers in lab-on-chip setups, imaging and recording workstations.
Digital interface and analog inputs allow you to calibrate each channel independently and to apply one or
multiple substances by switching channels manually or through data acquisition and imaging software.
The controller can be programmed using timers for each channel, or to dispense preset volumes. It also allows to program continuous sequence of solution applications, which can be used to replenish liquid
media during long-term experiments. You can accurately mix different solutions or generate dose-response
curves using only two solutions: buffer and concentrated test compound.
Each channel can be controlled through wireless remote, manually, by analog signal, TTL or through
RS232 connection for fully automated setups controlled through third party software packages (optional
USB adapters are also available).
The system can be upgraded to operate up to 4 channels in parallel. Can be connected to solution switching
miniature systems for changing and mixing solutions in sequence. The optional luer-lock manifolds
will combine multiple solutions into a single output. The size of the 2-channel system is 4x2.5x1.85 in
(separate from the controller). Multiple systems cad be attached to each other to form a multi-channel
system. Includes 1 ft. mounting rod and X-block to attach a standard 0.5in. posts. Comes with a set of tubing
for different flow ranges: 0.015” I.D. - 8-170 µl/min; 0.020” I.D. - 20-340 µl/min; 0.031” I.D. - 50-920
µl/min; 0.062” I.D. - 170-3400 µl/min; 0.093” I.D. -370-7300 µl/min; dual 0.015” I.D. x2 8-170 µl/min
(for different ranges select upgrades below). Includes 4-channel controller Item#: CFPS-2

 注：杨清辰发布