Pressure manifold压力歧管

Pressure manifold压力歧管

Pressure manifold压力歧管

气体混合物输送适配器-压力歧管

用于注射器固定器的适配器，用于在实验期间连接到气体源以饱和/起泡八种溶液

（二氧化碳饱和或充氧，或加压溶液）配有X-块，适合0.5英寸。

帖子。包括9个停止旋塞和塞子，用于关闭未使用的通道或公共入口。它还附带

连接到输出倒钩的管子和配件，以及在溶液中形成气泡的细管子。可以是

与石头或任何其他扩散器一起使用，以产生更大体积的气泡。也可以用来给溶液加压

通过连接到压力缸，PC.可以连接到另一个适配器以使用相同的气体源

混合物/压力。。项目#：SH-A

压力控制器

目录

编号说明

PC-R10压力控制器，可调高达7.5PSI-385毫米汞柱

-输出。

PC-R15压力控制器，可调高达15PSI-775 mm Hg

-输出，无调节真空

PC-100-25压力调节器，可调高达30PSI输出

PS-V8P 8通道压力歧管开关

PS-8P可编程8通道液体输送系统

svds2小容量灌注系统

带压力开关的svds2-P小容量灌注系统

PC-10气缸，用于加压/充氧溶液，10毫升，一套8个

PC-50加压/充氧溶液瓶，50ml，8套

SH-A气体混合物输送适配器

 Gas Mixture Delivery Adapter - Pressure manifold
Adapter for syringe holders to connect to a gas source to saturate/bubble eight solutions during experiments
(CO2 saturation or oxygenation, or pressurizing the solution.) Comes with X-block to fit 0.5 in.
posts. Includes 9 stop-cocks and plugs to close unused channels or the common inlet. It also comes with
tubing and fitting to connect to output barbs and thin tubing to form bubbles inside the solutions. Can be
used with stones, or any other diffuser, to bubble larger volumes. Can be also used to pressurize solutions
by connecting to pressure cylinders PC. Can be connected to another adapter to use the same source of gas
mixture/pressure.. Item#: SH-A
Pressure Controllers
Catalog
No. Description
PC-R10 Pressure controller, adjustable up to 7.5PSI - 385 mm Hg
- output.
PC-R15 Pressure controller, adjustable up to 15PSI - 775 mm Hg
- output, unregulated vacuum
PC-100-25 Pressure regulator, adjustable up to 30PSI output
PS-V8P 8-Channel pressure manifold-switch
PS-8P Programmable 8-channel liquid delivery system
svds2 Small Volume Perfusion System
svds2-P Small Volume Perfusion System SVDS2 with pressure switch
PC-10 Cylinder to pressurize/oxygenate solutions, 10 ml, set of 8
PC-50 Cylinder to pressurize/oxygenate solutions, 50ml, set of 8
SH-A Gas Mixture Delivery Adapter

 注：杨清辰发布