Solutions加压/充氧溶液的钢瓶

Solutions加压/充氧溶液的钢瓶

Solutions加压/充氧溶液的钢瓶

用于加压/充氧溶液的钢瓶，一套8个一套的高压灭菌器

给你的溶液加压。可用于驱动溶液通过100微米的毫米

例如，歧管。也可以通过给一根细管注入气体使溶液饱和（冒泡）

在汽缸里。配有截止阀和1/16英寸的配件。一、 D.油管。包括一个单向阀

连接到压力源、释放压力、重新加注气缸或连接到

气体混合物（例如氧化作用）。配有螺纹盖，便于重新加注。材质：polypr-

派琳。订购时卷。大容量650ml可根据要求提供。带

还提供内置10、25或40微米过滤器（订购时）。容量高达100毫升，适合

我们的SH注射器支架。物品#：PC

Cylinder to Pressurize/Oxygenate Solutions, Set of 8 A set of autoclavable
cylinders to pressurize your solutions. Can be used to drive solutions through 100 micron tip of MM
manifold, for example. Can be also used to saturate solutions with gases (bubbling) by feeding a thin tubing
inside the cylinder. Comes with stop-cocks and fitting for 1/16 in. I.D. tubing. Includes a 1-way valves
to connect to a pressure source, to release the pressure, to refill the cylinde , or to connect to a source of
gas mixture (oxygenation, for example). Comes with threaded cover for easy refill. Material: polypr -
pylene. Specify volume when ordering. Large 650ml volumes are available upon request. Cylinders with
built-in 10, 25 or 40 micron filters are also available (specify when ordering). Volumes up to 100ml fit to
our SH syringe holders. Item#: PC

 注：杨清辰发布