详细介绍
Programmable 2-Channel Heating双通道加热
Programmable 2-Channel Heating双通道加热
可编程双通道加热
控制器,精度高稳定性,低
电噪声,带数字RS232接口,
TC2-80-150型
提供一些敏感应用、纳米/压电定位、共焦或
例如AFM成像。通过图形控制操作稳定,使用方便的灵活控制
触摸屏。可用于客观加热器和灌注系统。大多数加热阶段的工作原理是
在线溶液预热器。自调整:不需要手动调整,以提供稳定的运行。
可通过触摸屏编程产生斜坡和温度阶跃,超过40分钟
每次10秒。
•高稳定性,0.01°C,无漂移。
•成像和记录期间无振动-无内部风扇。
•范围为-80至150°C,精度为0.1°C。
•自整定,无需调整。
•多个温度传感器可选择用于反馈、舞台和浴室。
•外部探头采用塑料封装:没有金属离子泄漏到溶液中
•内置过热保护。
•编程温度变化输入。
•用于监测和设置温度的模拟和数字输出。
•用于软件控制的数字接口。
•无电噪音-适用于电生理学。
•范围:高达150°C
•稳定性:0.01°C
•尺寸:8x1.8x11.5英寸。
•温度探头:
微型0.87mm厚(适合小体积
密室)
•设置:自我调节以稳定温度
不同样品体积和加热
舞台尺寸,无手动调整
必修的
•反馈:来自舞台(内置)或外部
探头(槽)
•输出:每通道4A,140W(35V
输入)
Programmable 2-Channel Heating
Controller, precision high stability, low
electrical noise, with digital RS232 interface,
TC2-80-150
Provides higher stability required for some sensitive applications, nano/piezo positioning, confocal or
AFM imaging for example. Flexible controls for stable operation and easy to use through the graphical
touch-screen. Can be used with objective heaters and with perfusion systems. Most heating stages work as
inline solution pre-heaters. Self-tuning: does not require manual adjustments to provide stable operation.
Can be programmed through the touch screen to generate ramps and temperature steps, longer than 40min
each, 10sec min.
• No drift due to high stability, 0.01°C.
• No vibrations during imaging and recording - no internal fan.
• Range from -80 to 150°C with accuracy 0.1°C.
• Self-tuning, no adjustments are required.
• Multiple temperature sensors to choose for feedback, STAGE and BATH.
• External probes are plastic-encapsulated: no metal ions leakage into solutions
• Built-in overheating protection.
• Inputs for programmed temperature changes.
• Analog and Digital Outputs to monitor and SET temperature.
• Digital interface for software control.
• No electrical noise - suitable for electrophysiology.
• Range: up to 150°C
• Stability: 0.01°C
• Dimensions: 8x1.8x11.5in.
• Temperature probe:
miniature 0.87mm thick (fits small volume
chambers)
• Settings: Self-tuning to stabilize temperature
of different sample volumes and heating
stage sizes, no manual adjustments are
required
• Feedback: from Stage (built-in) or External
probe (Bath)
• Output: 4A per channel, 140W (with 35V
input)
注:杨清辰发布