Heating Controller双通道加热控制器

Heating Controller双通道加热控制器
双通道加热控制器，带数字

RS232接口TC-1-100

低电噪音，显微镜级加热和冷却温度控制器。柔性自调整

稳定运行控制。可选择多个温度探头进行反馈。可以使用

有客观加热器。可用于flo控制和灌注系统。大多数加热和冷却

阶段作为在线溶液预热器工作。可用于flo控制和灌注系统。这个

第二个通道通常用于客观加热器或培养箱盖。

Heating Controller双通道加热控制器

Heating Controller双通道加热控制器

双通道加热控制器，带数字

RS232接口TC-1-100

低电噪音，显微镜级加热和冷却温度控制器。柔性自调整

稳定运行控制。可选择多个温度探头进行反馈。可以使用

有客观加热器。可用于flo控制和灌注系统。大多数加热和冷却

阶段作为在线溶液预热器工作。可用于flo控制和灌注系统。这个

第二个通道通常用于客观加热器或培养箱盖。包括连接电缆。一个

例如，可能需要外部温度探头来监测槽温。外部探头

塑料封装：溶液中无金属离子泄漏。包括内部电源：12V适合

对于大多数小型加热元件和目标加热器，微型培养箱需要18V，24V

冷却阶段需要。

•到150°C

0.1摄氏度

•内置过热保护

•温度探头：可选微型

0.87mm（适用于小容量腔室）

•反馈：级传感器或外部探头

•用于编程温度的RS232端口

变化

•设置温度变化的模拟输入

•监控温度的模拟输出

•手动或通过

外部TTL信号

•成像和记录期间无振动

-无内部风扇

•尺寸：6.5 x 4 x 9英寸。

•稳定性：0.01°C，自我调节

设置：柔韧和自我调节，允许

稳定不同样品的温度

容积和加热级尺寸；允许

将输出功率从0调整到96W；防止温度升高

超调；提供双重过热

保护

•输出：每个通道大12V 4A（18V和

24伏可选

 2-Channel Heating Controller, with digital
RS232 interface TC-1-100
Low electrical noise, heating and cooling temperature controller for microscope stages. Flexible selfadjusting
controls for stable operation. Multiple temperature probes to choose for feedback. Can be used
with objective heaters. Can be used with flo control and perfusion systems. Most heating and cooling
stages work as inline solution pre-heaters. Can be used with flo control and perfusion systems. The
second channel is usually used for objective heaters, or incubator lids. Includes connecting cables. An
external temperature probe might be needed, to monitor bath temperature for example. External probes are
plastic-encapsulated: no metal ions leakage into solutions. Includes an internal power supply: 12V is suitable
for most small heating elements and objective heaters, 18V is required for miniature incubators, 24V
is required for cooling stages.
• Range from room to 150°C with accuracy
0.1°C
• Built-in overheating protection
• Temperature probes: optional miniature
0.87mm (fit small volume chambers)
• Feedback: Stage sensor or External probe
• RS232 port for programmed temperature
changes
• Analog Input to set temperature changes
• Analog Output to monitor temperature
• Standby mode activated manually or by
external TTL signal
• No vibrations during imaging and recording
- no internal fan
• Dimensions: 6.5 x 4 x 9in.
• Stability: 0.01°C, self-adjusting
• Settings: flexibl & self-adjusting, allow
to stabilize temperature in different sample
volumes and heating stage sizes; allow to
regulate output from 0 to 96W; prevents temperature
overshoot; provide dual overheating
protection
• Output: 12V 4A max per channel (18V and
24V optional

 注：杨清辰发布