Objective Heater带温度的物镜加热器

Objective Heater带温度的物镜加热器

Objective Heater带温度的物镜加热器

带温度的物镜加热器

控制器用于任何目的的硅橡胶加热器。与浸油或浸水光学元件一起使用。内置温度

传感器。易于安装和拆卸。只需将加热器包裹在目标上，并用附带的

尼龙搭扣带。订购时宽度/高度。加热器通常连接在

圆柱面

更接近样本。项目#：MTC-HLS-025

•尺寸：0.5英寸。宽的

x 5英寸长

•温度稳定性：0.01°C，自我调节，

内置传感器；双重过热保护

•双重过热保护：调节

功率输出降至0W；设置消除

温度超调

门槛

物镜加热器•易于安装：适合任何物镜

目录号说明

MTC-HLS-025单通道温度控制器目标加热器

TC-HLS-05目标加热器升级

Objective Heater with Temperature

Controller A flexibl silicone heater for any objective. Used with oil or water immersion optics. Built-in temperature

sensor. Easy to attach and remove. Simply wrap the heater around objective and secure with included

Velcro tape. Specify the width/height when ordering. The heater is usually attached to

a cylindrical surface

of the objective, closer to the sample. Item#: MTC-HLS-025

• Dimensions: 0.5in. wide

x 5in long

• Temperature stability: 0.01°C, self-adjusting,

built-in sensor; dual overheating protection

• Dual overheating protection: regulated

power output down to 0W; settings eliminate

temperature overshoot; adjustable temperature

threshold

Objective heaters • Easy to install: Fits any objective

Catalog No. Description

MTC-HLS-025 Objective Heater with 1-channel temperature controller

TC-HLS-05 Objective Heater upgrade

 注：杨清辰发布