Heating element培养皿TC-E35即用加热系统

Heating element培养皿TC-E35即用加热系统

Heating element培养皿TC-E35即用加热系统

带35mm间隙的盖滑室加热元件

培养/放置样品的培养皿TC-E35即用加热系统

床单。与浴室一起使用，用于更换盖片CSC和UTIC。可更换盖片

允许在进行实验前培养细胞。加热器先预热灌注液

进入房间。即使与灌注系统一起使用，也能保持温度稳定。内联加热

特氟隆管适合包括灌注系统的歧管。可用于成像和记录。加州

与35毫米培养皿一起使用。因为有些品牌的培养皿直径不同

可能需要适配器TC-PA。需要显微镜适配器（显微镜型号时

订购，装运时安装在显微镜适配器内）。需要温度控制器。项目#TC-E35

•尺寸：直径52mm，高5.5mm

•温度稳定性：0.01°C，内置传感器

•光学间隙：35mm

•与床单和培养皿一起使用，

包括35mm玻璃底盘

•溶液预热器：可更换/可拆卸

聚四氟乙烯管，易于

•显微镜适配器：适用于

标准显微镜适配器MA和IMA

Heating element with 35mm clearance for Coverslip Chambers
and Petri dishes TC-E35 Ready to use heated system for samples cultured/placed on
coverslips. Used with bath chambers for replaceable coverslips CSC and UTIC. Replaceable coverslips
allow to culture cells before performing experiments. The heater preheats perfusion solution before it
enters the chamber. This keeps temperature stable even if used with perfusion systems. Inline heated
Teflon tubing fits manifolds included with perfusion systems. Can be used for imaging and recording. Ca
be used with 35 mm petri dishes. Since some brands of petri dishes have different diameter, reducing
adapters TC-PA might be required. Requires a microscope adapter (specify microscope model when
ordering, ships installed inside the microscope adapter). Requires a temperature controller. Item# TC-E35
• Dimensions: 52mm diameter, 5.5mm high
• Temperature stability: 0.01°C, built-in sensor
• Optical clearance: 35mm
• Use with: Coverslips and Petri dishes,
including 35mm glass bottom dishes
• Solution Pre-heater: Replaceable/Removable
Teflon tubing, easy to was
• Microscope adapter: Fits to 50mm cutout of
standard microscope adapters MA and IMA

 注：杨清辰发布