Adjustable Tubing可调管/电极夹MTH

Adjustable Tubing可调管/电极夹MTH

Adjustable Tubing可调管/电极夹MTH

可调管/电极夹MTH

在样品室周围放置多个管子、探针、玻璃毛细管和电极。这个

微型支架可以连接到显微镜适配器或任何磁性表面。几个持有者可以

放在同一个适配器上。支架包括多个延伸臂、球头和双卡箍

用于易碎附件（例如电极）。每只手臂增加约1英寸。延伸。分机是

使用拇指螺丝固定，可以方便地配置和调整倾斜、摆动和旋转

多轴角度。以下是可能的配置。不需要额外的工具。简单地说

任何铁表面上的支架和强磁铁将使管子和其他附件牢固就位

样品周围的任何地方。支架的底座只有0.75英寸。直径。磁性底部是

覆盖有特氟隆薄膜，可沿金属表面轻松移动支架。配有支架fs

在没有磁铁的M6或1/4-20螺纹表面上。带有粘合磁条，用于连接

即使是非磁性和塑料表面的支架。可用于灌注、控制流量和微量

灌注系统以及保持电极。在下一页中是使用

包括的零件，以及MH-1支架项目#：MTH可能的所有配置

•脚印：18毫米

•扩展：x2 1英寸。长，x1直角，x1

安装4毫米杆。带双夹钳。

•球头：x1

•管夹：x1和x1双夹

•安装：磁性，M6和1/4-20

螺纹表面和带贯穿件的表面

孔（可选的MH-SCR适配器可能是

必须）。

 Adjustable Tubing/Electrode Holder MTH
Position multiple tubing, probes, glass capillaries and electrodes around your sample chamber. This
miniature holder can be attached to a microscope adapter or any magnetic surfaces. Several holders can be
placed on the same adapter. The holder includes a number of extension arms, ball joint and double-clamp
for fragile accessories (electrodes for example). Each arm adds approx. 1 in. to extend. The extensions are
attached using thumb screws, which allow easy configurations and adjustments of tilt, swing, and rotation
angles in multiple axes. Below are possible configurations. No extra tools are needed. Simply put the
holder on any iron surface and the strong magnet will keep the tubing and other accessories firmly in place
anywhere around your sample. The base of the holder is only 0.75in. diameter. The magnetic bottom is
covered with Teflon film to move the holder easily along metal surfaces. Comes with stand fs to mount
on M6 or 1/4-20 threaded surfaces without magnet. Comes with adhesive magnetic strip to attach the
holders even to non magnetic and plastic surfaces. Can be used with perfusion, controlled flow and micro
perfusion systems as well as to hold electrodes. On the next page are possible configurations made using
the included parts, plus all configurations possible with MH-1 holders Item#: MTH
• Foot print: 18mm
• Extensions: x2 1in. long, x1 right-angle, x1
mounting 4mm rod. with double clamp.
• Ball-joint: x1
• Tubing clamp: x1 and x1 double-clamp
• Mounting: Magnetic, M6, and #1/4-20
threaded surfaces, and surfaces with through
holes (optional MH-SCR adapter might be
required).