Low Profile Small Volume Laminar Perfusion Chamber

Low Profile Small Volume Laminar Perfusion Chamber 

Low Profile Small Volume Laminar Perfusion Chamber 

低剖面小体积层流灌注腔-

卡瓦，PCCS2

内径只有10毫米。该室有两个单独的开口，用于溶液流入和流出

提供流畅的灌注，防止气泡进入。低姿态允许轻松访问

电极、移液管和浸入式光学元件。与微型支架结合，形成灌注系统。

使用方便，只需松开盖玻片上的粘合层（即使介质仍然存在），然后将

从顶部开始。盖玻片闪烁在倒角的底部。

腔室是由聚碳酸酯制成的。它只有5.5毫米厚（高）。舱底是

可更换的30mm圆形盖玻片。盖玻片通过粘合层连接到腔室

（或任何粘合剂，甚至融化的蜡）。使用后易于清洁。注：任何厚度30mm均可使用

床单。

腔体适合显微镜台内适配，订货时显微镜型号。密室

可在台内旋转以提供所需的样品方向。非标准的自定义阶段

可根据要求提供显微镜。

螺杆式或磁性管/电极保持器甚至延长了这种灵活性。它们可以被定位

在腔室周围的任何地方，这样管子就不会妨碍目标或记录电极。

此外，夹持器可以调整角度，因此，管子可以从任何

方向。支架安装在灌注管上。它们也可用于定位参考电极

或者是温度探头，甚至是输送气体（比如氧气）的管道。MTH-S公司

不锈钢吸管提供流畅的灌注。如果你打算在灌注期间使用这个系统

实验中，你所需要的只是一个流出装置，用于抽吸，以便在灌注过程中去除溶液。可以是

用于成像和记录。也可与50毫米BD Falcon和Willco玻璃底盘一起使用。

项目#：PCCS2

•外径：35mm

•高度：4毫米

•工作容积：直径11mm，约。

100微升

灌注室

目录号说明

用于30mm玻璃盖玻片的PCCS2小容量灌注室

或50毫米玻璃底盘

PCCS2-PDI粘合层，每包50个，用于PCCS2灌注

钱伯斯。

PLD22x40层流剖面灌注室

用于层流灌注室的PLDA适配器

MA-MTH微型磁保持架套件，x3。包括不锈钢

吸入管。

磁性显微镜适配器。显微镜

订购时提供型号。

IMA显微镜适配器，显微镜型号

IMA-MH微型可调支架套件，x3

 Low Profile Small Volume Laminar Perfusion  Chamber for Cove -
slips, PCCS2
Inside diameter is only 10 mm. The chamber has two separate openings for solution inflow and outflo
to provide smooth perfusion and prevent bubbles from coming in. Low profile permits easy access with
electrodes, pipettes and immersion optics. Combined with miniature holders, forms a perfusion system.
Easy to use, simply release adhesive layer on the coverslip (even with media still present), and attach the
chamber from the top. Coverslip is flashed on the bottom of the chambe .
The chamber is made out of polycarbonate. It is only 5.5 mm thick (high). The bottom of the chamber is
a replaceable 30mm round coverslip. The coverslip is attached to the chamber by using adhesive layers
(or any adhesive, even melted wax). Easy to clean after use. Note: Can be used with any thickness 30mm
coverslips.
The chamber fits inside microscope stage adapte , specify microscope model when ordering. The chamber
can be rotated inside the stage to provide required orientation of the sample. Custom stages for non-standard
microscopes are available upon request.
Screw-type or magnetic tubing/electrode holders extend this flexibility even furthe . They can be positioned
anywhere around the chamber, so that tubing is not in the way of objectives or recording electrodes.
Furthermore, the holders can adjust the angle and, as a result, tubing can approach the sample from any
direction. The holders fit to perfusion manifolds. They also can be used to position reference electrodes
or temperature probes, or even tubing to deliver gases, for example oxygen, over the sample. MTH-S
stainless suction tubing provides smooth perfusion. If you are planning to use this system during perfusion
experiments, all you need is a outflow unit for suction to remove solution during perfusion. Can be
used for imaging and recording. Can be also used with 50mm BD Falcon and Willco glass bottom dishes.
Item#: PCCS2
• Outside diameter: 35mm
• Height: 4mm
• Working volume: 11mm diameter, approx.
100 microl
Perfusion Chambers
Catalog No. Description
PCCS2 Small Volume Perfusion Chamber for 30mm Glass Coverslips
or 50mm Glass Bottom dishes
PCCS2-PDI Adhesive layers, pack of 50, for use with PCCS2 perfusion
chambers.
PLD22x40 Laminar Profile Perfusion Chamber
PLDA Adapter for Laminar Perfusion Chamber
MA-MTH Miniature Magnetic Holders Set, x3. Includes stainless
suction tubing.
MA Magnetic microscope adapter. Specify microscope
model when ordering.
IMA Microscope Adapter, specify microscope model
IMA-MH Miniature Adjustable Holders Set, x3

注：杨清辰发布