Ultra-Thin Live Imaging超薄实时成像室

Ultra-Thin Live Imaging超薄实时成像室

Ultra-Thin Live Imaging超薄实时成像室

超薄实时成像室通过放置一个薄垫片形成

两个25毫米的盖玻片之间。小厚度为150微米。您可以使用

一些垫片。内部开口为21mm。如有要求，可提供较小的开口

如果与光滑表面一起使用，粘合垫圈形成密封室。胶粘物很容易除去

使用。步骤：从胶垫上取下一层保护层，将胶垫放在盖玻片上方；

取下第二层保护层；将样品放入开口内；用第二个盖玻片盖住。

这些超薄的腔室可以与加热腔室和普通的玻璃载玻片一起使用。可与

浸油光学和多光子成像这些胶层可以附着在任何光滑的

表面。可与UTIC-25支架一起用于25毫米盖玻片（见右侧）。物品#：UTIC-21，

UTIC-20-24x24、UTIC-13-24x24

•光学间隙：21、20、13 mm

•厚度：150微米

•工作容积：52、47、20微升

Ultra-Thin Live Imaging Chamber The chamber is formed by putting a thin spacer
between two 25mm coverslips. The minimum thickness is 150 micron. You can change thickness by using
a number of spacers. The inside opening is 21mm. Smaller openings are available upon request The
adhesive gaskets form sealed chambers if used with smooth surfaces. The adhesive is easy to remove after
use. Procedure: remove one protective layer from adhesive gasket; position the gasket above the coverslip;
remove the second protective layer; put your sample inside the opening; cover with the second coverslip.
These ultra-thin chambers can be used with heated chambers and regular glass slides. Can be used with
oil-immersion optics and for multi-photon imaging These adhesive layers can be attached to any smooth
surface. Can be used with UTIC-25 holder for 25mm coverslips (see on the right). Item#: UTIC-21,
UTIC-20-24x24, UTIC-13-24x24
• Optical clearance: 21, 20, 13 mm
• Thickness: 150 micron
• Working volume: 52, 47, 20 microl

 注：杨清辰发布