OpenChamberfor CoverslipsCSC盖玻片开口室

OpenChamberfor CoverslipsCSC盖玻片开口室

OpenChamberfor CoverslipsCSC盖玻片开口室

可用于成像和记录。由底部底座和密封盖滑套的硅胶O形圈组成。

溶液和腔室底座之间没有接触，以防止离子泄漏。包括的顶部玻璃

盖玻片可以用来密封样品从顶部到微型培养箱。顶部可以是

使用附带的金属环或显微镜适配器的平弹簧固定。底部有一个

凹进型面，适合圆形盖卡瓦。所有地方的直径都与标准培养皿相同，包括的ORING允许使用不同厚度的盖玻片。只需将盖玻片放在里面并用硅胶密封即可

一个快速的动作。可以用顶部金属环固定。硅胶环也可以用平的

跳跃或显微镜适配器。对于低剖面腔室，考虑CSC-25设计，没有顶部夹具

是必需的。可作为灌注室，如果结合微型管支架。金属

碱促进传热。适合暖气实习和非暖气实习。项目'35；：CSC

外径：36mm

高度：8.5mm（带顶部金属环）

工作容积：

25毫米盖唇-21毫米，约350微升

20毫米盖唇-16毫米，约200微升

18mm盖唇-14mm，约150微升

13mm盖唇-9mm，约50微升

12毫米盖唇-8毫米，约50微升

10毫米盖唇-6毫米，约30微升

Open Chamber for Coverslips CSC
Can be used for imaging and recording. Consists of a bottom base, and a silicone O-ring to seal the coverslip.
There is no contact between solution and the chamber base to prevent ions leakage. The included top glass
coverslip can be used to seal your sample from top as well - to from a micro-incubator. The top can be
secured using the included metal ring, or using flat springs of microscope adapters. The bottom part has a
recessed profile to fit round coverslips. Overall diameter is the same as standard Petri dishes The included Orings allows using different thickness coverslips. Simply put the coverslip inside and seal it with silicone
ring by a snap-in action. Can be secured with a top metal ring. The silicone ring can be also secured by flat
springs of microscope adapters. For low-profile chambers, consider CSC-25 design, where no top clamps
are required. Can be used as a perfusion chamber, if combined with miniature tubing holders. The metal
base facilitates heat transfer. Fits to heating stages and non-heated stages. Item#: CSC
• Outside diameter: 36 mm
• Height: 8.5mm (with top metal ring)
• Working volume:
25mm coverslip - 21mm, approx. 350 microl
20mm coverslip - 16mm, approx. 200 microl
18mm coverslip - 14mm, approx. 150 microl
13mm coverslip - 9mm, approx. 50 microl
12mm coverslip - 8mm, approx. 50 microl
10mm coverslip - 6mm, approx. 30 microl

 注：杨清辰发布