PetriDishInsertPDI培养皿插件PDI自粘垫圈

PetriDishInsertPDI培养皿插件PDI自粘垫圈
培养皿插件PDI和自粘垫圈

将培养皿放入灌注室。生物相容性垫片与

盘子的底面，即使盘子里装满了介质或表面不平整。简单地按

在盘子底部插入几秒钟，在盘子里形成一个灌注系统。这个

低3毫米剖面允许您使用记录电极、垂直显微镜和浸水

目标也是。工作容积小：底部内径11mm，19号圆锥孔

在上面。

PetriDishInsertPDI培养皿插件PDI自粘垫圈

PetriDishInsertPDI培养皿插件PDI自粘垫圈

培养皿插件PDI和自粘垫圈

将培养皿放入灌注室。生物相容性垫片与

盘子的底面，即使盘子里装满了介质或表面不平整。简单地按

在盘子底部插入几秒钟，在盘子里形成一个灌注系统。这个

低3毫米剖面允许您使用记录电极、垂直显微镜和浸水

目标也是。工作容积小：底部内径11mm，19号圆锥孔

在上面。该室有两个单独的开口，用于溶液流入和流出，以防止气泡

从工作间进来。层流轮廓有助于灌注，并提供更快的速度

解决方案交换。可与50毫米玻璃底盘一起使用，以便于浸水进入

目标。项目#：PDI

•外径：35mm

•高度：3毫米

•工作容积：直径11mm，约。

100微升、

Petri Dish Insert PDI and Self-Adhesive Gaskets The insert converts a regular
petri dish into a perfusion chamber. The biocompatible gasket form airtight and leak-proof contact with
the bottom surface of the dish, even if the dish is filled with media or has an uneven surface. Simply press
the insert to the bottom of the dish for a few seconds to form a perfusion system right in your dish. The
low 3 mm profile allows you to use recording electrodes, upright microscopes with water immersion
objectives as well. It has small working volume: conical opening with 11 mm I.D. on the bottom and 19
mm on the top. The chamber has two separate openings for solution inflow and outflow to prevent bubble
from entering the working compartment. The laminar profile facilitates perfusion and provides faster
solution exchange. Can be used with 50mm glass bottom dishes for easy access with water immersion
objectives. Item#: PDI
• Outside diameter: 35mm
• Height: 3mm
• Working volume: 11mm diameter, approx.
100 microl

 注：杨清辰发布