Gas regulator PC-MI气体调节器PC-MI

Gas regulator PC-MI气体调节器PC-MI

Gas regulator PC-MI气体调节器PC-MI

气体调节器PC-MI

该控制器用于在微型培养箱中输送混合气体。连接到带有

压缩预混合（5%CO2/95%O2或任何其他，包括氮气和低O2）气体。输出

直接连接到培养箱或加湿器的气口。控制器调节输出气体流量

提供持续缓慢的气体混合物流，以替换培养箱内的残余气体。可以使用

作为调节压力的来源，用气体使溶液饱和并控制溶液的流动。简单的

使用。可调节以填充不同体积的培养箱。培养箱内二氧化碳平衡含量

不仅控制了细胞培养基的pH值，而且使气体消耗降到低。如果使用源

对于纯二氧化碳，需要一个不同的CO2-MI控制器。物品#：PC-MI

•输入：大150PSI

•输出：大750 sccm

•连接器：易于连接输入，

5/32英寸。（4毫米）外径管；10-32

带螺纹；包括1/4英寸的接头

O、 D.油管；

•指示器：数字显示器

•功率：100-230VAC 35W

•控制：

输入压力调节器0-25PSI，

设定输出%压力，

关闭/打开输入，

大流量可达750 sccm

二氧化碳控制器及附件

目录号说明

微型培养箱用PC-MI气体控制器

二氧化碳-500ML加湿器。

 Gas regulator PC-MI
The controller is used to deliver gas mixture inside miniature incubators. Connects to a cylinder with
compressed pre-mixed (5% CO2/95% O2 or any other, including nitrogen and low O2) gas. The output
connects directly to a gas port of the incubator or a humidifie . The controller regulates output gas flow to
provide continuous slow stream of gas mixture, to replace residual gases inside the incubator. Can be used
as a source of regulated pressure to saturate solutions with gases and to control flow of solutions. Simple
to use. Can be adjusted to fill incubators of di ferent volumes. Balanced CO2 content inside the incubator
not only controls pH of cell media, but also brings the gas consumption to the minimum. If using a source
of pure CO2, a different CO2-MI controller is required. Item#: PC-MI
• Inputs: max 150PSI
• Output: 750 sccm max
• Connectors: Easy-connect input,
5/32in. (4mm) O.D. tubing; 10-32
threaded; includes fitting for 1/4in
O.D. tubing;
• Indicators: digital display
• Power: 100-230VAC 35W
• Controls:
INPUT PRESSURE regulator 0-25PSI,
SET OUTPUT % pressure,
CLOSE/OPEN input,
FLOW rate up to 750 sccm max
CO2 Controller and Accessories
Catalog No. Description
PC-MI Gas Controller for Miniature Incubators
CO2-500ML Heated Humidifier.

 注：杨清辰发布