Objective Heater带温控器的柔性硅酮加热器

Objective Heater带温控器的柔性硅酮加热器
带温控器的柔性硅酮加热器

为了任何目标。与浸油或浸水光学元件一起使用。包括易于断开的电缆和

温度传感器。易于安装和拆卸。只需将加热器缠绕在目标上并固定

包括尼龙搭扣带。加热器通常安装在物镜的圆柱面上

给样品。尺寸：0.5 x 5英寸，厚度小于1毫米。项目#：MTC-HLS-025

•尺寸：0.5英寸。宽x长5英寸

Objective Heater带温控器的柔性硅酮加热器

Objective Heater带温控器的柔性硅酮加热器

带温控器的柔性硅酮加热器

为了任何目标。与浸油或浸水光学元件一起使用。包括易于断开的电缆和

温度传感器。易于安装和拆卸。只需将加热器缠绕在目标上并固定

包括尼龙搭扣带。加热器通常安装在物镜的圆柱面上

给样品。尺寸：0.5 x 5英寸，厚度小于1毫米。项目#：MTC-HLS-025

•尺寸：0.5英寸。宽x长5英寸

•温度稳定性：优于0.01℃，

自动调节，内置传感器，双过热

保护

•易于安装：适合任何目标

物镜加热器

目录号说明

MTC-HLS-025带温控器的物镜加热器，0.5x5in

Objective Heater with temperature controller A flexible silicone heater
for any objective. Used with oil or water immersion optics. Includes easy disconnect cable and incorporates
a temperature sensor. Easy to attach and remove. Simply wrap the heater around objective and secure
it with included Velcro tape. The heater is usually attached to a cylindrical surface of the objective, closer
to the sample. Dimensions: 0.5 x 5 in., less than 1mm thick. Item#: MTC-HLS-025
• Dimensions: 0.5in. wide x 5in long
• Temperature stability: better than 0.01°C,
self-adjusting, built-in sensor, dual overheating
protection
• Easy to install: Fits any objective
Objective heaters
Catalog No. Description
MTC-HLS-025 Objective Heater with temperature controller, 0.5x5in

 注：杨清辰发布