CO2加热和缺氧控制的微型培养箱TC-CSC-I型

CO2加热和缺氧控制的微型培养箱TC-CSC-I型

CO2加热和缺氧控制的微型培养箱TC-CSC-I型

CO2加热和缺氧控制的微型培养箱

TC-CSC-I加热CO2和缺氧控制微型培养箱用于盖玻片，

TC-CSC-I培养箱可与圆形可更换盖玻片长期使用

延时高分辨率成像。配有薄的高光学质量玻璃罩，防止蒸发

（可以移除）。易于使用：只需将样品盖滑入保持架，用硅密封

腔室，并用顶环固定。溶液和腔室底座之间没有接触

防止离子泄漏。底部有一个凹进的轮廓来安装圆形盖滑动气密密封件

可防止介质蒸发数小时。包括一个温度传感器和一个加热元件

30个

温度控制TC2-80-150-C。需要二氧化碳控制器。需要显微镜适配器。

订购时的显微镜型号。可升级为带有目标加热器的浸入式光学元件。项目#

TC-CSC-I型

Heated Micro incubator with CO2 and hypoxia control for coverslips,
TC-CSC-I Heated Micro incubator with CO2 and hypoxia control for coverslips,
TC-CSC-I The incubator can be used with round replaceable coverslips for long-term
time-lapse high resolution imaging. Comes with thin high optical quality glass cover to prevent evaporation
(can be removed). Easy to use: simply drop the sample coverslip into the holder, seal with silicon
chamber, and secure with the top ring. There is no contact between solution and the chamber base to
prevent ions leakage. The bottom part has a recessed profile to fit round coverslips The air-tight seal
will prevent media evaporation for hours. Incorporates a temperature sensor and a heating element for 
30
temperature control TC2-80-150-C. Requires a CO2 controller. Requires a microscope adapter. Specify
microscope model when ordering. Can be upgraded with an objective heater for immersion optics. Item#
TC-CSC-I

 注：杨清辰发布