Heated Microincubators加热微温箱现货

Heated Microincubators加热微温箱现货

Heated Microincubators加热微温箱现货

Heated chamber-incubator for replaceable coverslips, TC-CSC
Can be used for imaging and recording. Consists of a heated bottom base, and a silicone O-ring to seal the
coverslip. The metal base facilitates heat transfer. There is no contact between solution and the chamber
base to prevent ions leakage. The included top glass coverslip can be used to seal your sample from top
as well - to from a micro-incubator. The top can be secured using the included metal ring, or using flat
springs of microscope adapters. The bottom part has a recessed profile to fit round or square coverslips
The included O-rings allows you to use different thickness coverslips. Simply put the coverslip inside and
seal it with silicone ring by a snap-in action, then secure with a top metal ring (the silicone ring can be also
secured by flat springs of microscope adapters). For low-profile chambers, conside TC-CSC -L design,
where no top clamps are required. Can be used as a perfusion chamber, if combined with miniature tubing
holders. The heating element incorporates replaceable Teflon perfusion tubing inside, which makes the
element to work as inline pre-heater. Requires a microscope adapter and a temperature controller TC2-80-
150-C. Item# TC-CSC
• Dimensions: 50mm diameter
• Temperature stability: better than 0.01°C,
built-in sensor
• Solution Pre-heater: Replaceable/Removable
Teflon tubing, easy to was
• Microscope adapter: Fits to 50mm cutout of
standard microscope adapters MA and IMA
• Working volume:
25mm coverslip - 21mm, approx. 350 microl
22x22mm coverslip - 19mm, approx. 280 microl
20mm coverslip - 16mm, approx. 200 microl
18mm coverslip - 14mm, approx. 150 microl
13mm coverslip - 9mm, approx. 50 microl
12mm coverslip - 8mm, approx. 50 microl
10mm coverslip - 6mm, approx. 30 microl
Heated micro-incubators
Catalog No. Description
TC-CSC-25 Heated chamber for replaceable 25m round coverslips
TC-CSC-20 Heated chamber for replaceable 20mm round coverslips
TC-CSC-18 Heated chamber for replaceable 18mm round coverslips
TC-CSC-13 Heated chamber for replaceable 13mm round coverslips
TC-CSC-12 Heated chamber for replaceable 12mm round coverslips
TC-CSC22x22
Heated chamber for replaceable 22x22mm square
coverslips
CS-30 Replacement top glass cover for CSC holders, 30mm
diameter

可更换盖玻片的加热室培养箱，TC-CSC

可用于成像和记录。由加热的底部底座和密封

床单。金属底座有利于传热。溶液和腔室之间没有接触

防止离子泄漏的底座。附带的顶部玻璃盖玻片可用于从顶部密封样品

从一个微型孵化器。顶部可以用附带的金属环固定，也可以用平的

显微镜适配器的弹簧。底部有一个凹陷的轮廓，以适合圆形或方形盖玻片

随附的O形圈允许您使用不同厚度的盖片。把床单放进去

通过卡入操作用硅环密封，然后用顶部金属环固定（硅环也可以

用显微镜适配器的平弹簧固定）。对于低剖面室，考虑TC-CSC-L设计，

不需要顶部夹钳的地方。可作为灌注室，如果与微型导管结合使用

持有人。加热元件内置可更换的聚四氟乙烯灌注管，使

元件用作直列预热器。需要显微镜适配器和温度控制器TC2-80-

150-C.项目#TC-CSC

•尺寸：直径50 mm

•温度稳定性：优于0.01℃，

内置传感器

•溶液预热器：可更换/可拆卸

聚四氟乙烯管，易于

•显微镜适配器：适用于

标准显微镜适配器MA和IMA

•工作容积：

25毫米盖玻片-21毫米，约350微升

22x22毫米盖玻片-19毫米，约280微升

20毫米盖玻片-16毫米，约200微升

18mm盖玻片-14mm，约150微升

13mm盖玻片-9mm，约50微升

12毫米盖玻片-8毫米，约50微升

10毫米盖玻片-6毫米，约30微升

加热微型培养箱

目录号说明

TC-CSC-25可更换25m圆盖卡瓦的加热室

TC-CSC-20加热室，可更换20毫米圆盖卡瓦

TC-CSC-18可更换18mm圆盖卡瓦的加热室

可更换13mm圆盖卡瓦的TC-CSC-13加热室

TC-CSC-12可更换12mm圆盖卡瓦的加热室

TC-CSC22x22型

可更换的22x22平方毫米加热室

盖玻片

CS-30更换顶部玻璃盖，用于CSC支架，30mm

直径

 注：杨清辰发布