Sealed Chambers 高分辨率密封室现货

Sealed Chambers 高分辨率密封室现货

Sealed Chambers 高分辨率密封室现货

Ultra-Thin Sealed Imaging Chamber for 25mm Coverslips UTIC
The chamber is formed by putting a thin spacer between two 25mm coverslips. The minimum thickness is
150 micron. You can change thickness by using a number of spacers. The inside opening is 21mm. Smaller
openings are available upon request The adhesive gaskets form sealed chambers if used with smooth
surfaces, even with cell media on top. The adhesive is easy to remove after use. Procedure: put the
coverslip into the holder; remove one protective layer from adhesive gasket; position the gasket above the
coverslip; remove the second protective layer; put your sample inside the opening; cover with the second
coverslip. These ultra-thin chambers can be used with heated chambers and regular glass slides. Can be
used with oil-immersion optics and for multi-photon imaging.. Item#: UTIC-21, UTIC-13
• Optical clearance: 21, 20, 13 mm • Thickness: 150 micron
• Working volume: 52, 47, 20 microl

用于25毫米盖玻片的超薄密封成像室

腔室是通过在两个25毫米盖瓦之间放置一个薄垫片形成的。小厚度为

150微米。可以使用多个垫片来更改厚度。内部开口为21mm。较小的

如有要求，可提供开口。如果使用光滑的胶粘垫圈，则可形成密封室

表面，即使上面有手机媒体。这种粘合剂使用后很容易去掉。程序：放置

盖滑入保持架；从粘合垫圈上拆下一层保护层；将垫圈放在

盖玻片；去掉第二层保护层；把样品放在开口内；用第二层覆盖

床单。这些超薄的腔室可以与加热腔室和普通的玻璃载玻片一起使用。可以是

用于浸油光学和多光子成像。。项目#：UTIC-21，UTIC-13

•光学间隙：21、20、13 mm•厚度：150微米

•工作容积：52、47、20微升

 注：杨清辰发布