MicrofluidicBubble微流控气泡检测器

MicrofluidicBubble微流控气泡检测器

微流控气泡检测器有两种不同的外壳，适合1/16〃或1/4〃外径（OD）管使用。

它可以直接插在ELVEFLOW OB1压力控制器上，也可以作为一个独立的单元，带有ELVEFLOW传感器读取器和另一个能够读取电压信号的仪器。

气泡探测器不能直接连接到计算机！气泡探测器可以在数字模式下工作，它需要连接到特定的传感器读取器（单击此处了解更多信息）。传感器读卡器单独出售，可同时管理多达4个不同的传感器。由于集成的软件，您将能够记录、存储和分析传感器直接在您的计算机上收集的数据。

特点和优点：

可靠的无创技术

与相机检查相比，具有成本效益

基于真/假逻辑

兼容性强：油管尺寸范围广

软件平均功能

在设置中的任何位置使用

防止气泡破裂造成细胞损伤

设置自动化（在条件下使用的可能性）

MicrofluidicBubble微流控气泡检测器

The microfluidic bubble detector comes in two different housings suited to the use with 1/16″ or 1/4″ outside diameter (OD) tubes.

It can be plugged directly onto a the Elveflow OB1 pressure controller, or it can be used as a standalone unit with the Elveflow Sensor Reader and another instrument able to read voltage signals. 

The Bubble Detector cannot be directly connected to a computer! The Bubble Detector can work in digital mode and it needs to be connected to the specific Sensor Reader (click here for more information). The Sensor Reader is sold separately and can manage up to 4 different sensors at the same time. Thanks to the integrated software you will able to record, storage and analyse the data gathered by the sensor directly on your computer.  

Features & Benefits: 

• Reliable non invasive technique
• Cost effective compared to camera check
• Based on true/false logic
• Large compatibility: wide range of tubing size
• Software average functions
• Use anywhere in your setup
• Prevents damage in cells with bubble bursts
• Setup automation (possibility to use if conditions)