116-04A / B-187极导热环氧灌封料

116-04A / B-187极导热环氧灌封料

说明：116-04A是一种氮化物填充的双组分环氧灌封和封装化合物。产品是

设计用于在固化过程中迅速释放滞留空气，从而形成光滑、无针孔的表面。使用B-187时

希望使用寿命长，耐热性高。116-04A是F940A更导热的版本。

A部分B部分-187混合物

外观：灰琥珀灰

粘度（cps）：3600 500 3100

配合比（按重量计）：100 3----

适用期：---->4小时

混合说明：在加入固化剂之前，在原容器中预混料A部分。将B部分添加到A部分

搅拌均匀。当需要高温性能时，与零件B-187一起使用。注：不是

B-187的结晶不常见。在水浴中加热至40-45°C，使材料返回

原始粘度。催化剂的结晶不会以任何方式影响产品的性能。到

防止再结晶，将B-187储存在35-45°C之间。

固化说明：

处理性能：80°C时30分钟

*固化：80°C下1小时或

100°C时30分钟

典型固化特性：

比重1.63

硬度（肖氏硬度d）>85

科夫。热膨胀（in/in/℃x 10-6

）22个

热量。条件。（带MK）2.63

固化收缩率（%）0.189

热变形温度（摄氏度）115

抗拉强度（psi）9600

吸水率（%）<0.22

介电强度（伏特/密耳）475

体积电阻率（Ω-cm）1 x 1015

功率因数（60赫兹）0.028

介电常数（60赫兹）4.3

储存：保质期：在20-25°C的原始密封容器中保存12个月。

116-04A / B-187极导热环氧灌封料

116-04A / B-187
EXTREMELY THERMALLY CONDUCTIVE, EPOXY POTTING COMPOUND
DESCRIPTION: 116-04A is a nitride filled, two component, epoxy potting and encapsulating compound. Product is
designed to release entrapped air rapidly during cure, resulting in a smooth, pinhole free surface. Use B-187 when
long pot life and higher heat resistance is desired. 116-04A is a more thermally conductive version of F940A.

Part A Part B-187 Mixture
Appearance: Grey Amber Grey
Viscosity (cps): 3600 500 3100
Mix Ratio (By Weight): 100 3 ----
 Pot Life: ---- ---- > 4 Hrs
MIXING INSTRUCTIONS: Premix Part A in original container prior to adding curing agent. Add Part B to Part A
and mix until uniform. Use with Part B-187 when high temperature performance is desired. NOTE: It is not
unusual for crystallization of the B-187 to occur. Warm to 40-45°C in a water bath to return the material to it's
original viscosity. The crystallization of the catalyst does not affect the performance of the product in any way. To
prevent re-crystallization, store the B-187 at temperatures between 35-45°C.
CURING INSTRUCTIONS:

Handling Properties: 30 min @ 80°C
Full Cure: 1 hr @ 80°C or
30 min @ 100°C
TYPICAL CURED PROPERTIES:
Specific Gravity 1.63
Hardness (Shore D) > 85
Coef. of Thermal Exp. (in/in/°C x 10-6
) 22
Therm. Cond. (W/mK) 2.63
Cure Shrinkage (%) 0.189
Heat Distortion Temp. (°C) 115
Tensile Strength (psi) 9600
Water Absorption (%) < 0.22
Dielectric Strength (volts/mil) 475
Volume Resistivity (Ω-cm) 1 x 1015
Power Factor (60 HZ) 0.028
Dielectric Constant (60 HZ) 4.3
STORAGE: Shelf Life: 12 months at 20-25°C in original sealed containers.