124-08 A/B导电环氧胶粘剂

124-08 A/B导电环氧胶粘剂
描述：124-08 A/B是一种易于使用的，1至1的混合比，两部分，热固化，柔性，银填充环氧树脂。
DESCRIPTION: 124-08 A/B is an easy to use, 1 to 1 mix ratio, two part, heat cured, flexible, silver–filled epoxy

124-08 A/B导电环氧胶粘剂

描述：124-08 A/B是一种易于使用的，1至1的混合比，两部分，热固化，柔性，银填充环氧树脂。

胶粘剂。124-08系统可用于制作电气和机械附件

组件和设备。与典型的热固化体系不同，这种产品的导电性很好

对操作和环境条件不太敏感。124-08a/b在a

B组分是混合的。124-08A/B是118-15A/B的灵活版本。

A部分B部分

外观：银白色

稠度：糊状

配合比（按重量计）：11

适用期：<<4天

混合说明：在混合之前，将A和B部分预先混合在原容器中。将B部分添加到A部分并

搅拌均匀。

固化说明：当产品按照以下时间表之一固化时，可获得效果：

80°C时90分钟或

120°C时15分钟或

150°C下5分钟或

175°C时45秒

典型固化特性：

财产价值单位

粘性光滑膏-

体积电阻率0.0002至0.0004Ω-cm

热导率6.5 w/mk

玻璃化转变温度（tg）120°C

热膨胀系数-低于TG 33 x 10-6 in/in/℃

-高于TG 84 x 10-6英寸/英寸/摄氏度

拉伸剪切强度，小1500 psi

耐溶剂性优异-

可焊性编号-

比重2.6 g/cc

有效温度范围-55至200摄氏度

热稳定性高达300摄氏度

储存：25°C下，未开封、未混合的容器中保存12个月。

安全和操作：在通风良好的情况下使用。远离火花和明火。避免

长时间接触皮肤和吸入蒸汽。用肥皂和水清洗皮肤

124-08 A/B导电环氧胶粘剂

124-08 A/B
ELECTRICALLY CONDUCTIVE EPOXY ADHESIVE
DESCRIPTION: 124-08 A/B is an easy to use, 1 to 1 mix ratio, two part, heat cured, flexible, silver–filled epoxy
adhesive. The 124-08 system may be used for making electrical and mechanical attachments on electrical
components and devices. Unlike typical heat curing systems, this product always results in excellent conductivity
and is less sensitive to handling and ambient conditions. 124-08 A/B exhibits relatively high thixotropy when the A
and B components are mixed. 124-08A/B is a flexible version of 118-15A/B.
Part A Part B
Appearance: Silver Silver
Consistency: Paste Paste
Mix Ratio (by weight): 1 1
Pot Life:  <4 days
MIXING INSTRUCTIONS: Premix Parts A and B in original container prior to combining. Add Part B to Part A and
mix until uniform.
CURING INSTRUCTIONS: Best results are obtained when product is cured at one of the following schedules:
90 mins @ 80°C or
15 mins @ 120°C or
5 mins @ 150°C or
45 secs @ 175°C
TYPICAL CURED PROPERTIES:

Property Value Units
Viscosity Smooth Paste -
Volume Resistivity 0.0002 to 0.0004 Ω-cm
Thermal Conductivity 6.5 W/mK
Glass Transition Temperature (Tg) 120 °C
Coefficient of Thermal Expansion - Below Tg 33 x 10-6 in/in/°C
 - Above Tg 84 x 10-6 in/in/°C
Tensile Shear Strength, min. 1500 psi
Solvent Resistance Excellent -
Solderable No -
Specific Gravity 2.6 g/cc
Useful Temperature Range -55 to 200 ºC
Thermal Stability Good to 300 ºC
STORAGE: Shelf life: 12 months at 25°C, in unopened, unmixed containers.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid
prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin