119-07可移印，高介电强度，油墨/涂料

119-07可移印，高介电强度，油墨/涂料

说明：119-07是一种黑色，可移印，单组分，高介电强度，环氧油墨和

涂层。本产品对卡普顿、聚酯薄膜、铝、fr-4板、玻璃和

其他基材的种类。与传统的电介质材料不同，这种产品对

磨损、划伤和热老化。119-07的申请包括但不限于

电气和电子设备用绝缘强度涂层。119-07设计用于在

轮廓曲面。

典型特性：

粘度（cps）10000-12000

介电强度（伏特/0.001“）2500

介电常数（100Hz）4.0

体积电阻率（欧姆厘米）1 x 1016

铅笔硬度6h（小）

玻璃化转变温度（℃）160

水解稳定性优异

建议的处理和固化：119-07已准备好按供应使用。在使用之前，一定要

重新挂起填料。可通过添加少量CMI稀释剂113来实现进一步稀释-

39岁。对于大多数应用，在125℃下固化1小时或在150℃下固化30分钟可获得性能。

通过在125°C至

185°C。建议终用户通过实验确定适合个人的温度和时间

应用。

贮存期：25℃下保存2个月；或-10℃下保存6个月。

安全和操作：在通风良好的情况下使用。远离火花和明火。

避免长时间接触皮肤和吸入蒸汽。用肥皂和水清洗皮肤。

119-07可移印，高介电强度，油墨/涂料

119-07
PAD-PRINTABLE, HIGH DIELECTRIC STRENGTH, INK / COATING
DESCRIPTION: 119-07 is a black, pad-printable, one component, high dielectric strength, epoxy ink and
coating. This product features excellent adhesion to Kapton, Mylar, aluminum, FR-4 boards, glass and a
variety of other substrates. Unlike conventional dielectric materials, this product is very resistant to
abrasion, scratching, and thermal aging. Applications for 119-07 include, but are not limited to, high
dielectric strength coatings for electrical and electronic devices. 119-07 is designed for pad printing onto
contoured surfaces.
TYPICAL PROPERTIES:
Viscosity (cps) 10,000-12,000
Dielectric Strength (Volts/0.001") 2500
Dielectric Constant (100Hz) 4.0
Volume Resistivity (ohm-cm) 1 x 1016
Pencil Hardness 6H (min.)
Glass Transition Temperature (°C) 160
Hydrolytic Stability Excellent

SUGGESTED HANDLING AND CURING: 119-07 is ready to use as supplied. Prior to using, be certain to
re-suspend filler. Further thinning may be accomplished by adding small amounts of CMI Thinner # 113-
39. Best properties, for most applications, result when cured for 1 hour at 125°C, or 30 minutes at 150°C.
Good properties are obtained on a variety of substrates by curing at temperatures ranging from 125°C to
185°C. End user is advised to experimentally determine temperature and time best suited for individual
applications.
STORAGE: Shelf life: 2 months at 25°C; or 6 months at -10°C.
SAFETY AND HANDLING: Use with adequate ventilation. Keep away from sparks and open flames.
Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.