114-34耐溶剂150欧姆/方形油墨

114-34耐溶剂150欧姆/方形油墨

说明：114-34是一种耐溶剂导电油墨，适用于丝网印刷

印刷电路线路。本产品对卡普顿、聚酯薄膜、玻璃和各种

其他基质。与传统的导电材料不同，这种产品对甲基乙基有很强的抵抗力

按键。114-34的一些应用包括但不限于聚酰亚胺柔性材料的emi/rfi屏蔽

电路，聚合物厚膜电路，薄膜开关，表面安装设备的电气附件，

以及钽电容器的阳极涂层。114-34可与114-11混合，以提供广泛的

各种应用的导电水平。

典型固化特性：

稠度光滑膏

填充碳

抗皱性佳

体积电阻（Ω-cm）0.40

片材电阻率，大值（Ω/sq./mil）150

可焊性编号

水解稳定性优异

有效温度范围（摄氏度）-55至175

热稳定性（摄氏度）达到325

混合说明：在添加固化剂之前，将114-34 A部分预混合在原容器中。添加部件

B187或当需要快速固化时，将B1418添加到114-34中，并搅拌至均匀。注：对于

B-187或B1418的结晶发生。在水浴中加热至40-45°C，使材料返回

原始粘度。催化剂的结晶对产品的性能没有任何影响。

为防止再结晶，将催化剂储存在35-45°C之间。

重量配比：114-34 A部分B-187 B-1418

100 2.00 2.00

固化说明：B187 B1418

处理性能：80°C时30分钟，80°C时20分钟

**：1小时。@110°C 1/2小时。@110摄氏度

储存：在25°C的未开封容器中保存12个月。

安全和操作：在通风良好的情况下使用。远离火花和明火。避免

长时间接触皮肤和吸入蒸汽。用肥皂和水清洗皮肤。

114-34耐溶剂150欧姆/方形油墨

114-34
SOLVENT-RESISTANT 150 OHM/SQUARE INK
DESCRIPTION: 114-34 is a solvent-resistant electrically conductive ink, and coating suitable for screenprinting
printed circuit lines. This product features excellent adhesion to Kapton, Mylar, glass and a variety of
other substrates. Unlike conventional conductive materials, this product is very resistant to methyl ethyl
keytone. Some applications for 114-34 include, but are not limited to, emi/rfi shielding of polyimide flexible
circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface mounted devices,
and anode coatings for tantalum capacitors.114-34 may be blended with 114-11 to provide a wide range of
conductivity levels, for various applications.
TYPICAL CURED PROPERTIES:
Consistency Smooth Paste
Filler Carbon
Crease Resistance Excellent
Volume Resistance (Ω-cm) 0.40
Sheet Resistivity, max. (Ω/sq./mil) 150
Solderable No
Hydrolytic Stability Excellent
Useful Temperature Range (°C) -55 to 175
Thermal Stability (°C) Good to 325
MIXING INSTRUCTIONS: Premix 114-34 part A in original container prior to adding curing agent. Add Part
B187 or when faster curing is needed add B1418 to 114-34 and mix until uniform. NOTE: It is not unusual for
crystallization of the B-187 or B1418 to occur. Warm to 40-45°C in a water bath to return the material to its
original viscosity. The crystallization of the catalyst does not effect the performance of the product in any way.
To prevent recrystallization, store the catalyst at temperatures between 35-45°C.
MIX RATIO BY WEIGHT: 114-34 part A B-187 B-1418
100 2.00 2.00

CURING INSTRUCTIONS: B187 B1418
Handling Properties: 30 min. @ 80°C 20 min. @ 80°C
Full Cure: 1 hr. @ 110°C 1/2 hr. @ 110°C
STORAGE: Shelf life: 12 months at 25°C in unopened containers.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid
prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.